Hello,
we've the following setup:
RB450G (datacenter) <-> RB450G Customer
Between the Customer and our RB450G we've an EOIP Tunnel. We've also an OSPF Setup between those devices.
OSPF Settings
datacenter:
NSSA Area 0.0.0.1
Redistribute Default always (as type1) Filter ospf-in and ospf-out (not defined)
customer:
NSSA 0.0.0.1
Translator Role translate never
I see always the OSPF Neighbor. OSPF is workig still fine, but after some time or an reconnect i'll lose on Customer side the default gateway via OSPF. e.g. 10 minutes