Community discussions

MikroTik App
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 148
Joined: Wed Feb 06, 2013 2:48 am

Problems when I enable IXP BGP peer

Fri Nov 08, 2013 5:31 pm

Hi guys,
I've an Internet connection with ISP A using BGP (default route only), and now I added my first peering connection to our local IXP, the problem is when the local IXP BGP peer is established, I see that my ISP A downlink and IXP uplink get saturated after a few seconds 100Mbps! I don't know what could be causing this.

I've a BGP filter to only send my IP addresses and block everything else
BGP Filter1
chain=ixp-in
prefix=xx.xx.xx.xx/24
prefix-length=24-32
action=accept

BGP Filter2
chain=ixp-in
prefix=0.0.0.0/0
prefix-length=0-32
action=discard
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 148
Joined: Wed Feb 06, 2013 2:48 am

Re: Problems when I enable IXP BGP peer

Sat Nov 09, 2013 6:27 am

Hi guys,
More information, I noticed that IXP's routes are announced in my ISP BGP (all of them are listed on Advertisements), but in the BGP Instance I've everything disabled:

Redistribute Connected DISABLED
Redistribute Static DISABLED
Redistribute Other BGP DISABLED

Any suggestion?

Thanks,
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 148
Joined: Wed Feb 06, 2013 2:48 am

Re: Problems when I enable IXP BGP peer

Mon Nov 11, 2013 4:06 am

SOLVED :D
 
alex_rhys-hurn
Member
Member
Posts: 352
Joined: Mon Jun 05, 2006 8:26 pm
Location: Kenya
Contact:

Re: Problems when I enable IXP BGP peer

Thu Dec 05, 2013 9:43 am

How? :-?
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 148
Joined: Wed Feb 06, 2013 2:48 am

Re: Problems when I enable IXP BGP peer

Sat Dec 07, 2013 5:55 am

I added a simple filter to the outbound BGP, block everything, but my prefixes. :)

Who is online

Users browsing this forum: No registered users and 42 guests