Community discussions

MikroTik App
 
blake
Member
Member
Topic Author
Posts: 426
Joined: Mon May 31, 2010 10:46 pm
Location: Arizona

Lost MetaRouter config after 4.8 to 4.10 update

Mon Jul 05, 2010 10:40 am

I experienced two instances where one of my MetaRouter VMs lost its configuration after software upgrades to the host system.

Once was when I upgraded my RB1100 from ROS 4.8 to 4.10. The VM lost all of its config in /ip firewall filter.

The second happened tonight when I upgraded the firmware on the RB1100 from 2.26 to 2.27. The same VM lost all configured VLANs in /interface vlan. They were attached to a static interface which is a GigE port from the main system.

Could anyone at MikroTik shed some light on the possible causes for this?
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Lost MetaRouter config after 4.8 to 4.10 update

Mon Jul 05, 2010 2:47 pm

was metarouter already configured some time before, or just before the updates?
 
blake
Member
Member
Topic Author
Posts: 426
Joined: Mon May 31, 2010 10:46 pm
Location: Arizona

Re: Lost MetaRouter config after 4.8 to 4.10 update

Mon Jul 05, 2010 8:07 pm

The VM was setup a few days before. The updates to /ip firewall filter were performed shortly before the software upgrade. The VLAN configuration had been present for a number of days before the firmware upgrade.

Who is online

Users browsing this forum: No registered users and 6 guests