Community discussions

MikroTik App
 
ElectricCat
newbie
Topic Author
Posts: 26
Joined: Thu Oct 22, 2009 2:46 pm

Some connection trouble with RB250

Wed Dec 01, 2010 3:28 pm

We purchased some RB250 switches, installed a couple of them to our clients. But recently we've tried to connect to another RB250 and found, that its first port could not establish connection with an RB411 device at 100FD FastEthernet speed. The only way to get it connected through 1st port is to force them both to connect at 10M speed. Another ports are working normally.

This was encountered with 3 another switches from the same package. What is the matter and how to get them work on 100M speed?
Last edited by ElectricCat on Wed Dec 01, 2010 9:01 pm, edited 1 time in total.
 
kirshteins
MikroTik Support
MikroTik Support
Posts: 592
Joined: Tue Dec 02, 2008 10:55 am

Re: Some connection trouble with RB250

Wed Dec 01, 2010 4:19 pm

What SwOS version are you using? Are all ports affected?
 
ElectricCat
newbie
Topic Author
Posts: 26
Joined: Thu Oct 22, 2009 2:46 pm

Re: Some connection trouble with RB250

Wed Dec 01, 2010 4:34 pm

SwOS version is 1.2, but that's not a matter - the same was seen with SwOS v1.0. Only the 1st port is affected
 
KillerOPS
Member Candidate
Member Candidate
Posts: 150
Joined: Sat Oct 31, 2009 9:27 pm

Re: Some connection trouble with RB250

Thu Dec 16, 2010 10:01 pm

are you using POE?
 
ElectricCat
newbie
Topic Author
Posts: 26
Joined: Thu Oct 22, 2009 2:46 pm

Re: Some connection trouble with RB250

Fri Dec 17, 2010 9:19 am

No, PoE is not being used.

Who is online

Users browsing this forum: No registered users and 15 guests