Hello

I have 20 streamers on IPTV application , when I use RB260GS all streams are ok and video fine.

Just when connect CRS125-24G-1S and replace the RB260GS , I got some pixelate on the picture , when I switch it back into 260GS work fine.

I tried on CRS125 disable the firewall and

1-Bride all interface (same issue).
2-Make ether2 master port for all interface (less pixelate).


is there is any way to configure it like 260GS ?

do you have the issue using default configuration??

this is using it as a switch only

Odd... first thing I'd try is upgrading RouterOS, upgrading firmware, and reset configuration with no defaults. Then reset again with defaults or setup master/slave ports accordingly. Have you checked tools > profile when streaming?

Also try setting all ethernets hardware queue type from only-hardware-queue to "default-ethernet" and see if it makes a difference.

remember CRS only supports jumbo frame up to 4k