Community discussions

MikroTik App
 
User avatar
desertadmin
Member Candidate
Member Candidate
Topic Author
Posts: 232
Joined: Tue Jul 26, 2005 6:09 pm
Location: Las Vegas, New Mexico
Contact:

gateway statics

Thu Jul 17, 2008 9:59 am

Well I added to some posts that got the whole thread deleted. So I am starting a new one please do not post anything about NSTREME and regulations on this thread.

Ok the wiki of:
http://wiki.mikrotik.com/wiki/OSPF_to_s ... redundancy

Has too many errors and is incomplete. Some one had mentioned to me that you could do it with out OSPF but with static gateway routes. How would you do that? I understand gateways and routing but I am so confused as to how you would do this in such a way that it would be in failover mode as well.

Any contribution to help defeat my ignorance would be much appreciated.

-Sincerely,
DesertAdmin
 
User avatar
desertadmin
Member Candidate
Member Candidate
Topic Author
Posts: 232
Joined: Tue Jul 26, 2005 6:09 pm
Location: Las Vegas, New Mexico
Contact:

Re: gateway statics

Thu Jul 17, 2008 10:11 am

Here is a generic diagram of what we want to do. We want to have static routes instead of OSPF but what would the routes look like on the individual MTs?

Image

Any help would be most appreciated.

-Sincerely,
DesertAdmin
 
User avatar
desertadmin
Member Candidate
Member Candidate
Topic Author
Posts: 232
Joined: Tue Jul 26, 2005 6:09 pm
Location: Las Vegas, New Mexico
Contact:

Re: gateway statics

Thu Jul 17, 2008 10:16 am

I do not think that I need a bridge but who knows maybe I am incorrect. I know this must be easy for you guys out there but I just can not think of how to do this.

-Sincerely,
DesertAdmin
 
User avatar
desertadmin
Member Candidate
Member Candidate
Topic Author
Posts: 232
Joined: Tue Jul 26, 2005 6:09 pm
Location: Las Vegas, New Mexico
Contact:

Re: gateway statics

Fri Jul 18, 2008 5:39 am

Or show me what to do with the OSPF since there is no up-to-date manual section on this.

-Sincerely,
DesertAdmin
 
User avatar
desertadmin
Member Candidate
Member Candidate
Topic Author
Posts: 232
Joined: Tue Jul 26, 2005 6:09 pm
Location: Las Vegas, New Mexico
Contact:

Re: gateway statics

Mon Jul 21, 2008 9:42 pm

SO even though everyone always mention just do it with OSPF no one really knows how to do it? I do not understand why this topic was even deleted before. I would hope that those who helped the previous thread get deleted to at least add something constructive to this one.

Any help would be appreciated.

-Sincerely,
DesertAdmin
 
changeip
Forum Guru
Forum Guru
Posts: 3830
Joined: Fri May 28, 2004 5:22 pm

Re: gateway statics

Mon Jul 21, 2008 11:16 pm

you just want to send traffic full duplex across the wifi links? One side should use a default gateway on one line, and the other side should just use a default gateway of the other link, that will then only send traffic one way on each, simulating full duplex. correct me if i'm wrong ...

Who is online

Users browsing this forum: CGGXANNX, GoogleOther [Bot] and 81 guests