Thu Jun 19, 2008 7:52 pm
Ok so this is what i've tried in theory
PPPOE server A issues ip addresses 10.0.0.0/24
PPPOE server B issues ip addresses 20.0.0.0/24
Gateway A ip address = 192.168.1.1
Gateway B ip address = 192.168.2.1
I have setup a mangle rule to mark all connections originating from the 10.0.0.0/24 subnet with the routing mark "groupA" and the same with the 20.0.0.0/24 ip range but with "groupB"
I then added 2 new routes, 1 for group A and another for group B
First route:
Destination: 0.0.0.0/0
Gateway: 192.168.1.1
Mark: groupA
2nd route:
Destination: 0.0.0.0/0
Gateway: 192.168.2.1
Mark: groupB
Would the above setup work?