I have a 493ah setup with eth1 setup with my outside public address(24.214.202.x/30, and have ports eth2-eth5 bridged with eth2 having a public address(69.73.91.x/28,routed block of 14 addresses to my eth1 network by my isp) and then clients hanging off the other ports(eth3-eth5) with public addresses in the same subnet as eth2. I need to have a port that will nat the address of eth2, and then serve up 192.168.200.1/24 as a private network for a segment of users on my internal side. How would I set this up? Currently I have a checkpoint router/fw attached to the MT port eth5, with a public and then private side of 192.168.200.1, and want to know can I get that router out and have the MT do the same thing, thus saving one of my public ip's.

But of course!!! Just set up the NAT rules properly!