Hi,
We have problem with API on RB1000. During login it shouts "cannot get challenge" (and the 5s timeout doesn't work). This problem exists only on RB1000. We tried with Intel based hardware and everything works without problem. THe stangest thing is, that it was working week ago !
Best Regards,
Lukasz Tylski
Re: cannot get challenge error on RB1000
are you trying yo connect to it using python client on wiki?
Re: cannot get challenge error on RB1000
No, using PHP. This worked before. I think it stopped working after upgrade from 3.21 to 3.22.
Regards,
Lukasz Tylski
Regards,
Lukasz Tylski
Re: cannot get challenge error on RB1000
It works only a few days after reboot.
Regards,
Lukasz
Regards,
Lukasz
Re: cannot get challenge error on RB1000
i ran this command on RB1000
and this is the result:
ok, it is not 3.22, but it is older 3.23 build. And as you can see, it is up for 10 days
Code: Select all
/system/resource/printCode: Select all
!re
=uptime=1w3d02:49:13
=version=3.23
=free-memory=487736
=total-memory=517016
=cpu=e500v2
=cpu-count=1
=cpu-frequency=1333
=cpu-load=7
=free-hdd-space=37060
=total-hdd-space=61440
=write-sect-since-reboot=2885834
=write-sect-total=100872855
=bad-blocks=0
=architecture-name=powerpc
=board-name=RB1000Re: cannot get challenge error on RB1000
OK, I know that's not only a problem with 3.22 because it works on other x86 based machine !
Re: cannot get challenge error on RB1000
Ha, from 3.23 problems went away ! ... untill 3.30... The same problems again....