Community discussions

MikroTik App
 
mamlya
just joined
Topic Author
Posts: 3
Joined: Tue Mar 06, 2012 1:20 pm

X86 version crash Intel Server platform

Tue Mar 06, 2012 1:27 pm

X86 crash v 5.xx multi cpu Intel Server platform:
MB: se7501wv2 CPU: 2x2 Xeon RAM 4Gb.

по русски - при включении multi cpu сервер виснет. 2 ксеона по 2 ядра.
 
glucz
Member Candidate
Member Candidate
Posts: 123
Joined: Wed Jun 06, 2007 10:25 pm

Re: X86 version crash Intel Server platform

Tue Mar 06, 2012 7:28 pm

Hello,

I have reported similar problems. 5.13 and 5.14 seem to have problems with older (pre core 2) Intel CPU-s. I see that you also use an older intel platform. For me all dual xeon's and P4's failed while AMDs worked well from Geode to Athlon64. I suggest you try the same and report what you find.

SSTP VPN doesn't even run on these Intel 5.13/14s, so I had to immediately downgrade, but if it is a build platform problem, then there could be other problems as well.

GL
 
mamlya
just joined
Topic Author
Posts: 3
Joined: Tue Mar 06, 2012 1:20 pm

Re: X86 version crash Intel Server platform

Thu Mar 08, 2012 7:45 am

The operating system is intended for house use or for the professional? If for professional, should support professional server platforms first of all.

Еxcuse for bad English.
 
mamlya
just joined
Topic Author
Posts: 3
Joined: Tue Mar 06, 2012 1:20 pm

Re: X86 version crash Intel Server platform

Fri Mar 09, 2012 1:35 pm

If to take out one processor everything zametsatelno works and 2 kernels are defined.

Если снять один процессор - все замечательно работает. Определяет два ядра. Вставляю наместо второй процессор - виснет после включения. Вывод - поддерживает многоядерноть а не многопроцессорность.

Who is online

Users browsing this forum: agamerawesome, GoogleOther [Bot], xrlls and 99 guests