I'm having a problem building some new routers. We are building new Core i5-750 based routers that will run Mikrotik RouterOS 4.5
Problem is that I'm running NetInstall 4.6 (latest available) and the new router boots from PXE onboard Intel 82578DC, obtains an ip, and obtains the Mikrotik netinstall code from NetInstall. Then it immediately fails with the following:
Mikrotik Router Software Remote installation
FATAL ERROR: no network card found
I have 3 network interfaces in this router, onboard 82578DC Intel, and two PCI-e Intel (EXPI9301CT) 82574L network cards.
I've tried booting from the onboard and each Intel PCI-e network interface with the same results on all 3 adapters. Any particular reason NetInstall isn't finding these Intel interfaces (82574L/82578DC)?
Motherboard : Intel DP55WG
Chipset : P55 Express
CPU : Intel Core i5-750 Quad
Memory : Kingston DDR3-1333 Dual Channel 2gb Memory Kit
SSD : Transcend 2gb Flash SSD SATA (TS2GSDOM22V)
Additional NICS : EXPI9301CT (QTY 2) and Intel EXPI9404PTL (4 port)
(7 Intel Network Interfaces Total)