The 2nd issue is when I ping devices from the terminal that are on ports 2-4 the ping times are <1ms. But when I ping a bullet m5 on port 1 the ping times are 2-5ms. Is this correct correct behavior? I know port 1 is not part of the switch but everything is bridged together.
- Brian
Code: Select all
[code]
[admin@greenacres-rtr1] /interface ethernet> pr stats
name: ether1 ether2 ether3 ether4 ether5
rx-broadcast: 87650 476 0 50641
rx-pause: 0 0 0 143
rx-multicast: 3438 54242 0 45534
rx-fcs-error: 0 0 0 0
rx-align-error: 0 0 0 0
rx-runt: 0 0 0 0
rx-fragment: 0 0 0 0
rx-64: 131207316 20836130 25147 32424874
rx-65-127: 121307896 3906151 175628 27697223
rx-128-255: 27892642 81821 3 3387338
rx-256-511: 15538136 114724 0 1546048
rx-512-1023: 9273780 186392 0 2706969
rx-1024-1518: 33045290 330328 247170 8167667
rx-1519-max: 70 0 0 0
rx-too-long: 0 0 0 0
rx-overflow: 0 0 0 0
rx-bytes: 83199618312 2261836360 283974776 19066291>
tx-broadcast: 1021771 3359705 3360231 3309742
tx-pause: 0 0 0 0
tx-multicast: 62426 3312672 3366977 3321539
tx-underrun: 0 0 0 0
tx-64: 57082817 4441629 3686492 11810016
tx-65-127: 76234505 3512799 3255095 12254508
tx-128-255: 71176189 214287 17172 4566368
tx-256-511: 45115900 370427 83731 3197818
tx-512-1023: 30326197 447355 1852 2960111
tx-1024-1518: 192404677 38469420 263627 64646130
tx-1519-max: 0 0 0 0
tx-too-long: 0 0 0 0
tx-collision: 0 0 0 0
tx-excessive-collision: 0 0 0 0
tx-multiple-collision: 0 0 0 0
tx-single-collision: 0 0 0 0
tx-excessive-deferred: 0 0 0 0
tx-deferred: 0 0 0 0
tx-late-collision: 0 0 0 0
tx-bytes: 345635090544 56669164222 940140700 10256296>