Community discussions

MikroTik App
 
engineertote
Member Candidate
Member Candidate
Topic Author
Posts: 177
Joined: Tue May 19, 2009 1:36 pm

Forwarding ICMP to WAN1 in PCC load Balance

Mon Aug 09, 2010 11:56 am

Hi all

i have two WAN with1 LAN using PCC load Balance with per connection calssication .

The ping to DNS and to any other web site sometimes coming from WAN1 and sometimes comming from WAN2 .. same for normal internet traffic .

i want to keep the claissification of internet traffic as it is .. but i need only the ICMP go through WAN1 so we i do ping to any web site .. only the ICMP going through WAN1 coz WAN1 have lowest latency than WAN2

Any post is highly appreciated


Regards
 
fewi
Forum Guru
Forum Guru
Posts: 7717
Joined: Tue Aug 11, 2009 3:19 am

Re: Forwarding ICMP to WAN1 in PCC load Balance

Mon Aug 09, 2010 4:42 pm

Add a firewall mangle line above the PCC lines that matches protocol=icmp and has an action of 'accept'.
 
engineertote
Member Candidate
Member Candidate
Topic Author
Posts: 177
Joined: Tue May 19, 2009 1:36 pm

Re: Forwarding ICMP to WAN1 in PCC load Balance

Mon Aug 09, 2010 8:49 pm

Many thanks .. its ok now
 
zimbofury
newbie
Posts: 48
Joined: Wed Nov 03, 2010 8:10 am

Re: Forwarding ICMP to WAN1 in PCC load Balance

Tue Feb 21, 2012 10:53 am

with this, is there anyway to mark whatever i like (say smtp to a specific IP) and send it through a specific gateway only? i dont want load balancing as such. The one ISP is blocking other ISPs smtp and certain sites. I want to use WAN2 to handle the blocked traffic (which i will mark in mangle) only.

REF : http://forum.mikrotik.com/viewtopic.php?f=14&t=59446
 
elsman31
just joined
Posts: 1
Joined: Sun Jun 24, 2012 10:40 am

Re: Forwarding ICMP to WAN1 in PCC load Balance

Sun Jun 24, 2012 10:45 am

Add a firewall mangle line above the PCC lines that matches protocol=icmp and has an action of 'accept'.

Hi,

Do you have some sample on this?

Thanks

Who is online

Users browsing this forum: Bing [Bot] and 18 guests