Community discussions

MikroTik App
 
marcelocbf
newbie
Topic Author
Posts: 35
Joined: Sat Jun 09, 2007 2:31 am

L2TP mood

Sat Sep 25, 2010 9:08 pm

Hello,

I had this L2TP tunnel working fine for almost a month. But now suddenly it's not working properly anymore. The only thing that I changed in the routers recently was that I removed the admin user from all routers changing for a different username with full access.

Here is my config ...

L2TP-Server Router (OFFICE1)
[me@cmi.bra] /ppp secret> print detail
Flags: X - disabled
 1   name="soho.usa" service=l2tp caller-id="" password="123456" profile=default-encryption
     local-address=172.16.1.1 remote-address=172.16.1.2 routes="192.168.2.0/24 172.16.1.2 1" limit-bytes-in=0
     limit-bytes-out=0

[me@cmi.bra] /interface l2tp-server server> print
          enabled: yes
          max-mtu: 1460
          max-mru: 1460
             mrru: disabled
   authentication: pap,chap,mschap1,mschap2
  default-profile: default-encryption
Remote Office (OFFICE2)
[me@soho-usa] /interface l2tp-client> print
Flags: X - disabled, R - running
 0  R name="l2tp-cmi" max-mtu=1460 max-mru=1460 mrru=disabled connect-to=XXX.XXX.XXX.XXX user="soho.usa"
      password="123456" profile=default-encryption add-default-route=no dial-on-demand=no allow=pap,chap,mschap1,mschap2
The L2TP tunnel is established fine as always been, I can ping both sides, but I cannot access anything on the OFFICE. I can ssh the OFFICE1 router fine, but it stops responding after a couple seconds, and if I try to access a webpage in the OFFICE1, I can see that it finds the server, but keeps loading the page forever. It seems to be a problem with TCP, but it's just a guess.

I have no clue what happened because as I already said, I haven't changed any critical configuration in any router. I have rebooted both router coutless times, but no luck.

Any help is appreciated,

Thanks,
 
marcelocbf
newbie
Topic Author
Posts: 35
Joined: Sat Jun 09, 2007 2:31 am

Re: L2TP mood

Sun Sep 26, 2010 5:47 pm

Just an update ...

I can access (with some difficulty) but successfully the computers on the other side through VNC ... So, no all TCP traffic has problems ...

Who is online

Users browsing this forum: benw, disksweep, jason9456402, m4rk3J, rudivd and 67 guests