Folks,
I could really use your help. I'm trying to do something simple but doesn't seem to work.
I need to route traffic coming into the router on port 80 to my web server. I have a dynamic public address.
I have an RB433AH.
My public address is on ether1 (DHCP Client from Cable Modem) and my web server is on ether3.
I'm bridging the ether2, ether3 and wlan1 together:
[admin@RB433AH] /interface bridge> print
Flags: X - disabled, R - running
0 R name="bridge1" mtu=1500 l2mtu=1522 arp=enabled
mac-address=00:0C:42:2B:41:68
protocol-mode=none priority=0x8000
auto-mac=yes admin-mac=00:00:00:00:00:00
max-message-age=20s forward-delay=15s
transmit-hold-count=6 ageing-time=5m
# INTERFACE BRIDGE PR PATH-COST HORIZON
0 ether2 bridge1 0x 10 none
1 ether3 bridge1 0x 10 none
2 wlan1 bridge1 0x 10 none
Here are the rules in /ip firewall nat:
0 chain=srcnat action=masquerade
src-address=192.168.1.0/24
1 chain=dstnat action=dst-nat
to-addresses=192.168.1.20 to-ports=80
protocol=tcp dst-address-type=local
dst-port=80
Why is it not working? What I'm I missing?
Any help is appreciated!
THANKS much!