Page 1 of 1

Groove, Omnitik and new products

Posted: Mon Mar 21, 2011 1:06 pm
by sw0rdf1sh
Since I saw this http://www.mikrotik.com/download/share/hu11.pdf I was very excited about new products.This is definately great news.
Can we get an idea of what the cost of these products would be? I'm highly interested in Groove and Omnitik....

Re: Groove, Omnitik and new products

Posted: Mon Mar 21, 2011 1:09 pm
by normis
product details will be coming soon, check with your distributor in ~2 weeks

Re: Groove, Omnitik and new products

Posted: Mon Mar 21, 2011 1:14 pm
by sw0rdf1sh
thanx normis.Looking forward for those

Re: Groove, Omnitik and new products

Posted: Mon Apr 04, 2011 4:50 pm
by suse
when Groove, Omnitik will be available in China? thanks.

Re: Groove, Omnitik and new products

Posted: Tue Apr 05, 2011 5:58 pm
by wirelessguy1
Hi Normis,

Will this RB750UP available in boards also??..you know what I'm thingking :)
The 24V 0.8A is not enough if it would drive the POE enabled ports

Thanks

Wirelessguy

Re: Groove, Omnitik and new products

Posted: Wed Apr 06, 2011 11:52 am
by normis
the new devices will be available in 1-2 months, so keep asking your distributors.

what makes you think that 24V 0.8A is "not enough"? Not enough for what?

Re: Groove, Omnitik and new products

Posted: Sat Apr 09, 2011 8:39 am
by ilius168
What is the power source for RB 750UP?

what if a device such as RB 800 which needs 48V?
Will it support 802.3af in the future?

Re: Groove, Omnitik and new products

Posted: Sat Apr 09, 2011 9:01 am
by normis
What is the power source for RB 750UP?

what if a device such as RB 800 which needs 48V?
Will it support 802.3af in the future?
no, 802.3af is not supported, it outputs the same as it gets in from jack, so 24V basically. it can only output 600mA per port, so calculate accordingly. 48V is not possible, this is more optimized for SXT, RB711 etc.

Re: Groove, Omnitik and new products

Posted: Wed May 04, 2011 10:52 am
by David2006
RB750UP was/is planned to be availlable this month - is the timeline still actual? The datasheet exists? Are there shielding/grounding on the eth. ports?

Re: Groove, Omnitik and new products

Posted: Thu May 05, 2011 7:47 am
by normis
RB750UP was/is planned to be availlable this month - is the timeline still actual? The datasheet exists? Are there shielding/grounding on the eth. ports?
this says June http://www.mikrotik.com/download/share/generic.pdf

Re: Groove, Omnitik and new products

Posted: Thu May 05, 2011 9:48 am
by David2006
Thank for reply, hopfly the timeline is still reachable :) . Previously:

- Same as regular RB750
+ USB port
+ 24V Power Output on four ports
* Controllable PoE out
* SNMP support
* Voltage and current monitors
+ Can power PoE capable devices
+ Less cables and PoE injectors
- Available in May

Re: Groove, Omnitik and new products

Posted: Thu May 05, 2011 2:12 pm
by Chupaka
yeah, http://www.mikrotik.com/download/share/hu11.pdf says May =)

looking forward to RB1100AHx2 tests

Re: Groove, Omnitik and new products

Posted: Thu May 05, 2011 2:19 pm
by normis
yeah, http://www.mikrotik.com/download/share/hu11.pdf says May =)

looking forward to RB1100AHx2 tests
404

Re: Groove, Omnitik and new products

Posted: Thu May 05, 2011 2:23 pm
by Chupaka
yeah, 10 minutes ago it was there - I first checked (see top post of the topic), then posted the result ;)

p.s. Normis, change the description of BETA forum! (ROS v5) -> (ROS v6)

Re: Groove, Omnitik and new products

Posted: Thu May 05, 2011 2:32 pm
by normis
fixed

Re: Groove, Omnitik and new products

Posted: Wed May 25, 2011 1:53 pm
by m4rk0
Hello,

We have just installed one RB435G and it works fine for now 8)

Re: Groove, Omnitik and new products

Posted: Sun Jun 05, 2011 12:44 pm
by otgooneo
Does anybody have new info about OmniTik? Can`t wait to test OmniTik. That is what I`m searching for until 2009. Hope it has 802.11 b/g/n.

Re: Groove, Omnitik and new products

Posted: Sun Jun 12, 2011 12:44 pm
by Trisc
Omnitik - 802.11a/b/g/n?

I'm hoping it has dual wlan interfaces: 5GHz for backhaul/mesh and 2.4Ghz for clients - is this too much to ask for?

I am keeping my fingers crossed!

Re: Groove, Omnitik and new products

Posted: Sun Jun 12, 2011 7:41 pm
by risipetillo
Mikrotik,

When can we expect the OmniTik to hit store shelves? Can't wait to get my hands on them?

Can someone provide some additional specs on the radio, cpu, ram etc?

Re: Groove, Omnitik and new products

Posted: Wed Jun 15, 2011 3:59 pm
by Trisc
Mikrotik? Any answer to our questions on Omnitik?

I'd also be curious to know why an outdoor device needs 5 LAN ports if what I read in the announcement was correct.

Re: Groove, Omnitik and new products

Posted: Thu Jun 16, 2011 6:50 am
by otgooneo
More ethernet port is good. I like it.

Re: Groove, Omnitik and new products

Posted: Thu Jun 23, 2011 12:40 pm
by otgooneo
Hey MT Guys, please give us little information about your new routers. Almost every day I ask new products from our distributor.

Re: Groove, Omnitik and new products

Posted: Thu Jul 14, 2011 4:29 pm
by roc-noc.com
Mikrotik,

When can we expect the OmniTik to hit store shelves? Can't wait to get my hands on them?

Can someone provide some additional specs on the radio, cpu, ram etc?
We have them in stock. Specs can be found here.

http://www.roc-noc.com/pdf/omnitik/omnitik_u_5hnd.pdf

It looks to be a great companion to the RB/SXT-5HnD for a 5GHz mini-POP.

Tom