The time never updates on the router. Am I missing something?/system ntp client print
enabled: yes
mode: unicast
primary-ntp: 67.215.65.132
secondary-ntp: 67.215.65.132
poll-interval: 16s
active-server: 67.215.65.132
The time never updates on the router. Am I missing something?/system ntp client print
enabled: yes
mode: unicast
primary-ntp: 67.215.65.132
secondary-ntp: 67.215.65.132
poll-interval: 16s
active-server: 67.215.65.132
[admin@Lamp Post] > /ip pool print detail
0 name="dhcp_pool1" ranges=192.168.88.3-192.168.88.254
[admin@Lamp Post] >> /ip dhcp-server print detail
Flags: X - disabled, I - invalid
0 name="dhcp1" interface=ether1 lease-time=3d address-pool=dhcp_pool1
bootp-support=static authoritative=after-2sec-delay
[admin@Lamp Post] >> /ip dhcp-server network print detail
0 address=192.168.88.0/24 gateway=192.168.88.1
dns-server=208.67.222.222,208.67.220.220
[admin@Lamp Post] >> /ip dns export
# jan/02/1970 10:02:44 by RouterOS 5.2
# software id = V9I9-BAQY
#
/ip dns
set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512 servers=208.67.222.222,208.67.222.220
[admin@Lamp Post] >> /ip address print detail
Flags: X - disabled, I - invalid, D - dynamic
0 address=192.168.88.1/24 network=192.168.88.0 interface=ether1
actual-interface=ether1
1 D address=58.165.11.141/32 network=10.112.112.125 interface=BigPon
actual-interface=BigPond
[admin@Lamp Post] >> /ip route print detail
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
0 ADS dst-address=0.0.0.0/0 gateway=10.112.112.125
gateway-status=10.112.112.125 reachable BigPond distance=1 scope=30
target-scope=10
1 ADC dst-address=10.112.112.125/32 pref-src=58.165.11.141 gateway=BigPond
gateway-status=BigPond reachable distance=0 scope=10
2 ADC dst-address=192.168.88.1/24 pref-src=192.168.88.1 gateway=ether1
gateway-status=ether1 reachable distance=0 scope=10
[admin@Lamp Post] >> /interface print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU
0 R ether1 ether 1500
1 R BigPond
[admin@Lamp Post] >> /ip firewall export
# jan/02/1970 10:04:59 by RouterOS 5.2
# software id = V9I9-BAQY
#
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
tcp-close-wait-timeout=10s tcp-established-timeout=1d tcp-fin-wait-timeout
10s tcp-last-ack-timeout=10s tcp-syn-received-timeout=5s \
tcp-syn-sent-timeout=5s tcp-syncookie=no tcp-time-wait-timeout=10s \
udp-stream-timeout=3m udp-timeout=10s
/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=ether1
add action=masquerade chain=srcnat disabled=no out-interface=BigPond
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061
set pptp disabled=no
/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=ether1
add action=masquerade chain=srcnat disabled=no out-interface=BigPond
/ip dns
set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512 servers=208.67.222.222,208.67.222.220
/ip address print detail
Flags: X - disabled, I - invalid, D - dynamic
0 address=192.168.88.1/24 network=192.168.88.0 interface=ether1
actual-interface=ether1
1 D address=58.165.11.141/32 network=10.112.112.125 interface=BigPon
actual-interface=BigPond
# ROS V5.5
# once in some time lets use some other NTP servers
# pick your country code (but not all works):
:local region "us"
:local ntp1 [:resolve ("0.".$region.".pool.ntp.org")]
:local ntp2 [:resolve ("1.".$region.".pool.ntp.org")]
/system ntp client set primary-ntp=$ntp1 secondary-ntp=$ntp2
:log info ("NTP servers updated, ".$ntp1.", ".$ntp2)