duplicate UDP stream or multiple dst-nat ip's

brosky · Sun Oct 30, 2011 10:34 am

Hi.

I receive a UDP stream on port 1235

 3   ;;; TV Bistrita
     chain=dstnat action=dst-nat to-addresses=192.168.22.2 to-ports=1235 
     protocol=udp dst-address=192.168.1.99 dst-port=1235

I want to "duplicate" that stream to another computer...

 2 X ;;; TV Bistrita #2
     chain=dstnat action=dst-nat to-addresses=10.0.13.214 to-ports=1235 
     protocol=udp dst-address=192.168.1.99 dst-port=1235 

 3   ;;; TV Bistrita
     chain=dstnat action=dst-nat to-addresses=192.168.22.2 to-ports=1235 
     protocol=udp dst-address=192.168.1.99 dst-port=1235

However, only the first specified IP receives the stream.
How can i send the source stream to a list or to more than one dst ip ?

Thank you.

sadeghrafie · Sun Oct 30, 2011 1:08 pm

Hi,
It might be done

to-addresses

It says to addresses not address. So you can add another IP but How....?

MT wiki http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT
have an example

/ip firewall nat add chain=dstnat dst-address=11.11.11.1-11.11.11.254 \
	action=netmap to-addresses=2.2.2.1-2.2.2.254

/ip firewall nat add chain=srcnat src-address=2.2.2.1-2.2.2.254 \
	action=netmap to-addresses=11.11.11.1-11.11.11.254

but it use the IP range

duplicate UDP stream or multiple dst-nat ip's

duplicate UDP stream or multiple dst-nat ip's

Re: duplicate UDP stream or multiple dst-nat ip's

Who is online