Community discussions

MikroTik App
  4. RouterOS
  5. General

RB44GV under Ubuntu, installation

Post Reply
 
pospanko
Member Candidate
Member Candidate
Topic Author
Posts: 279
Joined: Sun Dec 18, 2005 4:23 pm

RB44GV under Ubuntu, installation

Wed Oct 19, 2011 1:06 pm

Hi,

I just can't install it (I can't see it under ifconfig -a; kernel 2.68.35-11). I'm only basic linux user so any help would be appriciated. Beside this, there is problem of finding linux drivers for this card. Can enyone help? Thx
Top
 
UsRb
newbie
Posts: 46
Joined: Mon Sep 18, 2006 4:32 pm
Location: Europe - Croatia - Zabok
Contact:
Contact UsRb

Re: RB44GV under Ubuntu, installation

Wed Oct 19, 2011 3:53 pm

What did you try till now?
What is the output of lspci and dmesg commands regarding ethernet card?
Top
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: RB44GV under Ubuntu, installation

Wed Oct 19, 2011 3:54 pm

what distribution you are using and did you compile kernel with drivers yourself? If you are basic user, best option would be to choose simple Linux distribution that require little or no user intervention in critical parts of OS, such as kernel and drivers.
Top
 
pospanko
Member Candidate
Member Candidate
Topic Author
Posts: 279
Joined: Sun Dec 18, 2005 4:23 pm

Re: RB44GV under Ubuntu, installation

Tue Oct 25, 2011 5:44 pm

Hi,

I manage to start it up, but now I have lot of inputs in my syslog:
Examle:
Code: Select all
Oct 25 16:17:43 videocache1 kernel: [11554.750031] via-velocity 0000:04:09.0: BAR 1: set to [mem 0xfe902000-0xfe9020ff] (PCI address [0xfe902000-0xfe9020ff])
Oct 25 16:17:43 videocache1 kernel: [11554.790053] via-velocity 0000:04:0a.0: BAR 0: set to [io  0xd100-0xd1ff] (PCI address [0xd100-0xd1ff])
Oct 25 16:17:43 videocache1 kernel: [11554.790058] via-velocity 0000:04:0a.0: BAR 1: set to [mem 0xfe901000-0xfe9010ff] (PCI address [0xfe901000-0xfe9010ff])
Oct 25 16:23:03 videocache1 kernel: [11874.710052] via-velocity 0000:04:08.0: BAR 0: set to [io  0xd300-0xd3ff] (PCI address [0xd300-0xd3ff])
Oct 25 16:23:03 videocache1 kernel: [11874.710058] via-velocity 0000:04:08.0: BAR 1: set to [mem 0xfe903000-0xfe9030ff] (PCI address [0xfe903000-0xfe9030ff])
Oct 25 16:23:03 videocache1 kernel: [11874.750030] via-velocity 0000:04:09.0: BAR 0: set to [io  0xd200-0xd2ff] (PCI address [0xd200-0xd2ff])
Oct 25 16:23:03 videocache1 kernel: [11874.750036] via-velocity 0000:04:09.0: BAR 1: set to [mem 0xfe902000-0xfe9020ff] (PCI address [0xfe902000-0xfe9020ff])
Oct 25 16:23:03 videocache1 kernel: [11874.790064] via-velocity 0000:04:0a.0: BAR 0: set to [io  0xd100-0xd1ff] (PCI address [0xd100-0xd1ff])
Oct 25 16:23:03 videocache1 kernel: [11874.790070] via-velocity 0000:04:0a.0: BAR 1: set to [mem 0xfe901000-0xfe9010ff] (PCI address [0xfe901000-0xfe9010ff])
Oct 25 16:25:01 videocache1 CRON[4093]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 25 16:28:23 videocache1 kernel: [12194.710030] via-velocity 0000:04:08.0: BAR 0: set to [io  0xd300-0xd3ff] (PCI address [0xd300-0xd3ff])
Oct 25 16:28:23 videocache1 kernel: [12194.710037] via-velocity 0000:04:08.0: BAR 1: set to [mem 0xfe903000-0xfe9030ff] (PCI address [0xfe903000-0xfe9030ff])
Oct 25 16:28:23 videocache1 kernel: [12194.750049] via-velocity 0000:04:09.0: BAR 0: set to [io  0xd200-0xd2ff] (PCI address [0xd200-0xd2ff])
Oct 25 16:28:23 videocache1 kernel: [12194.750055] via-velocity 0000:04:09.0: BAR 1: set to [mem 0xfe902000-0xfe9020ff] (PCI address [0xfe902000-0xfe9020ff])
Oct 25 16:28:23 videocache1 kernel: [12194.790055] via-velocity 0000:04:0a.0: BAR 0: set to [io  0xd100-0xd1ff] (PCI address [0xd100-0xd1ff])
Oct 25 16:28:23 videocache1 kernel: [12194.790061] via-velocity 0000:04:0a.0: BAR 1: set to [mem 0xfe901000-0xfe9010ff] (PCI address [0xfe901000-0xfe9010ff])
Oct 25 16:33:43 videocache1 kernel: [12514.710049] via-velocity 0000:04:08.0: BAR 0: set to [io  0xd300-0xd3ff] (PCI address [0xd300-0xd3ff])
Oct 25 16:33:43 videocache1 kernel: [12514.710055] via-velocity 0000:04:08.0: BAR 1: set to [mem 0xfe903000-0xfe9030ff] (PCI address [0xfe903000-0xfe9030ff])
Oct 25 16:33:43 videocache1 kernel: [12514.750059] via-velocity 0000:04:09.0: BAR 0: set to [io  0xd200-0xd2ff] (PCI address [0xd200-0xd2ff])
Oct 25 16:33:43 videocache1 kernel: [12514.750065] via-velocity 0000:04:09.0: BAR 1: set to [mem 0xfe902000-0xfe9020ff] (PCI address [0xfe902000-0xfe9020ff])
Oct 25 16:33:43 videocache1 kernel: [12514.790047] via-velocity 0000:04:0a.0: BAR 0: set to [io  0xd100-0xd1ff] (PCI address [0xd100-0xd1ff])
Oct 25 16:33:43 videocache1 kernel: [12514.790053] via-velocity 0000:04:0a.0: BAR 1: set to [mem 0xfe901000-0xfe9010ff] (PCI address [0xfe901000-0xfe9010ff])
Oct 25 16:35:01 videocache1 CRON[4103]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 25 16:39:03 videocache1 kernel: [12834.710065] via-velocity 0000:04:08.0: BAR 0: set to [io  0xd300-0xd3ff] (PCI address [0xd300-0xd3ff])
Oct 25 16:39:03 videocache1 kernel: [12834.710072] via-velocity 0000:04:08.0: BAR 1: set to [mem 0xfe903000-0xfe9030ff] (PCI address [0xfe903000-0xfe9030ff])
Oct 25 16:39:03 videocache1 kernel: [12834.750063] via-velocity 0000:04:09.0: BAR 0: set to [io  0xd200-0xd2ff] (PCI address [0xd200-0xd2ff])
Oct 25 16:39:03 videocache1 kernel: [12834.750070] via-velocity 0000:04:09.0: BAR 1: set to [mem 0xfe902000-0xfe9020ff] (PCI address [0xfe902000-0xfe9020ff])
Oct 25 16:39:03 videocache1 kernel: [12834.790055] via-velocity 0000:04:0a.0: BAR 0: set to [io  0xd100-0xd1ff] (PCI address [0xd100-0xd1ff])
Oct 25 16:39:03 videocache1 kernel: [12834.790060] via-velocity 0000:04:0a.0: BAR 1: set to [mem 0xfe901000-0xfe9010ff] (PCI address [0xfe901000-0xfe9010ff])
Is this normal or...?
I'm using Ubuntu server 11.04. Kernel: 2.6.38-11-server.
No I didn't compile kernel with drivers.
Janisk, what distribution do you recomend for me to use? I thought that Ubuntu is best way to go...
Top
Post Reply

Who is online

Users browsing this forum: iDaemon and 225 guests
  4. RouterOS
  5. General