I am trying to get my RG750 to connect and recieve a DHCP IP address, I have setup the pppoe-client connection and the status shows as connected,
under DHCP-client I have setup the same interface that the pppoe is configure with to obtain a DHCP address from the ISP but the interface is not getting an IP.
Please help me.
Code: Select all
/interface pppoe-client print detail
Flags: X - disabled, R - running
0 R name="pppoe-out1" max-mtu=1480 max-mru=1480 mrru=disabled
interface=ether5 user="xxxxxxxxx@xxxxxxxxxxx" password="xxxxxxxxxx"
profile=default service-name="" ac-name="" add-default-route=yes
dial-on-demand=no use-peer-dns=yes allow=pap,chap,mschap1,mschap2
Code: Select all
[admin@MikroTik] > /ip dhcp-client print
Flags: X - disabled, I - invalid
# INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS
0 ether5 yes yes searching...