Community discussions

MikroTik App
 
User avatar
marioclep
Trainer
Trainer
Topic Author
Posts: 139
Joined: Sat Jul 11, 2009 4:36 pm
Location: Cordoba - Argentina
Contact:

New MikroTik products?

Wed Dec 21, 2011 4:41 pm

Hi,

I was searching for new MikroTik products, and I found this:

RB411L: http://download.routerboard.pl/rb411L.pdf

RB433GL: http://download.routerboard.pl/rb433GL.pdf

R5-SHPn: http://download.routerboard.pl/R5SHPn1.pdf

Are these products available?

Regards
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2395
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New MikroTik products?

Wed Dec 21, 2011 5:50 pm

Nice.
When available?

Why all the new products (711, 411L, SXT, Omnitik, 433GL) do not have a serial port? It was very helpful!
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2395
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New MikroTik products?

Sun Dec 25, 2011 2:10 pm

In datashed je wrote rb411L have Voltage monitor http://routerboard.com/pdf/366/rb411L.pdf
But there is - Voltage monitor NO http://routerboard.com/RB411L

What is wrong?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26387
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New MikroTik products?

Tue Dec 27, 2011 8:11 am

sorry, but there is no voltage monitor on RB411L, we will fix the PDF
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2104
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: New MikroTik products?

Tue Jan 10, 2012 4:39 am

Hi Normunds,

Can someone please update http://wiki.mikrotik.com/wiki/Manual:Ma ... uterBoards with the MTU supported by the 411L and 433GL.


Thanks!
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2395
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: 411L show voltage

Thu Jan 19, 2012 12:12 pm

sorry, but there is no voltage monitor on RB411L, we will fix the PDF

Hello Normis, I have there RB411L and show voltage. How is this possible?
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26387
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New MikroTik products?

Thu Jan 19, 2012 12:17 pm

is that correct voltage? :) if not, probably we need to remove the menu, because there is no voltage monitor hardware on this device.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2395
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New MikroTik products?

Thu Jan 19, 2012 12:24 pm

is that correct voltage? :) if not, probably we need to remove the menu, because there is no voltage monitor hardware on this device.
We dont have 3000Volts :) It is powered by 9V. You can remove field in 5.12.
Mark

Who is online

Users browsing this forum: Bing [Bot] and 30 guests