Community discussions

MikroTik App
 
User avatar
ringlet
newbie
Topic Author
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

TCP performance behind 2 or 3 p2p bridge

Fri Mar 02, 2012 2:47 am

HI,
recently i have problem with getting good speed in my network where i have p2p bridge behind another p2p bridge.

when a am doing BTEST from point A do B with 1 tcp connection i get about 45 Mbit
then taking test from A to C which is last mikrotik in the row and a get only 10-15 Mbit with 1 TCP
but when i take more tcp connection then i get better speed
anyway UDP goes realy good A to B or A to C is about 90 Mbit , radio link is stable

i use realy simple configuration like AP Bridge then station bridge then another p2p brindge in the same config
in each mt i put wlan1 and ether1 to bridge ,

any ideas why it is like that? or what i should use to have better TCP performance form A to C ?
 
vik1988
Member Candidate
Member Candidate
Posts: 235
Joined: Sun Oct 25, 2009 2:18 pm
Location: India

Re: TCP performance behind 2 or 3 p2p bridge

Fri Mar 02, 2012 4:13 am

you can disable "ip firewall connection tracking" and "bridge filter use firewall no" to improve TCP performance.
 
User avatar
ringlet
newbie
Topic Author
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Re: TCP performance behind 2 or 3 p2p bridge

Fri Mar 02, 2012 10:29 am

you can disable "ip firewall connection tracking" and "bridge filter use firewall no" to improve TCP performance.

i have done it before but dont see any better tcp connection

it is funny becouse tcp test only via 1 p2p bridge from A to B or from B to C i going fine, but from A to C it is not...

i am using mikrotik 5.14 on bridges and on rb750
 
vik1988
Member Candidate
Member Candidate
Posts: 235
Joined: Sun Oct 25, 2009 2:18 pm
Location: India

Re: TCP performance behind 2 or 3 p2p bridge

Sat Mar 03, 2012 4:41 am

is this on wireless or wireline.??
 
rodolfo
Long time Member
Long time Member
Posts: 553
Joined: Sat Jul 05, 2008 11:50 am

Re: TCP performance behind 2 or 3 p2p bridge

Sat Mar 03, 2012 11:20 am

sometimes you could have an ethernet at 10Mbit
 
User avatar
ringlet
newbie
Topic Author
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Re: TCP performance behind 2 or 3 p2p bridge

Mon Mar 05, 2012 1:52 am

is this on wireless or wireline.??
wireless bridge connected to d-link switch on both sides

Who is online

Users browsing this forum: aoravent, Google [Bot], K0NCTANT1N, ofatieiev and 63 guests