Hi,
i got a wifi network using MT (433 etc) on my high sites and clients connect to it using UBNT products via PPPoE. All the towers connect to a central hub where goes out to the Internet.

Now what I want to do is the following:
1)Limit a client's Internet bandwidth (already doing this using profiles under PPoE)
2) I got a server in my server room to which I want to give my clients full speed access. Meaning the bandwidth must not be throttled. Please keep in mind that the netowork is a routed network.

Is that possible with PPPoE?

thx!

i don't know much about ubnt, add second static route with static internal ip´s like 10.x.x.x/8
to your server, don't user the PPPoE for this.
I duster this with my Voip, second Route to second Router, with different Internet Connection

mistry7

hi,

sorry but that wont work with ppoe as the limitation has already happend before going out via the 2nd gw.

Once again:


Connection on my Clients:

Wan Interface IP-1 10.10.100.xxx/24 Route VOIP Mangled for there IP Adress you need
Wan Interface PPPoE IP -2 85.199.166.128/25 Route Main used for all normal Traffic

I don't know if Airos can do this.

The PPPoE Limit only works on the PPPoE Interface, because the Access Concentrator does the Limit not the Client.

mistry7