Community discussions

MikroTik App
 
psychoplot
just joined
Topic Author
Posts: 5
Joined: Sat Apr 02, 2011 5:58 pm

Speed Limit Bridged Port

Thu Jun 28, 2012 1:34 am

I am trying to limit speed on individual ports on a mikrotik 750G that are bridged to the wan port.

Here is the scenario:

port 1 is wan port connected to a bridged modem /w 5 IPs available.

port 2 is connected to a router I would like to limit to 3mbps/512kbps with one of the public ip's

port 3 is connected to a router I would like to limit to 1.5mbps/384kbps with one of the public ip's


Ports 1,2 and 3 are bridged.

I tried to limit it using a simple queue and assigning it to the interface which does not work.

If I setup the interface on NAT, then the queue port speed limit works... however I do not want it to be NATed

Thanks for the help.

- Jon
 
taduikis
Member
Member
Posts: 436
Joined: Sat Jul 07, 2007 12:09 pm

Re: Speed Limit Bridged Port

Thu Jun 28, 2012 8:13 am

Have you tried setting bandwidth on desired ethernet interface?
http://wiki.mikrotik.com/wiki/Manual:Interface/Ethernet

I know it's not very convenient and crude setting bw limit per port basis, but it might work.
 
psychoplot
just joined
Topic Author
Posts: 5
Joined: Sat Apr 02, 2011 5:58 pm

Re: Speed Limit Bridged Port

Thu Jun 28, 2012 10:39 pm

You can only limit the download speed by the interface...and it is their defined speeds as well... you can not limit the upload....
 
samsung172
Forum Guru
Forum Guru
Posts: 1191
Joined: Sat Apr 04, 2009 3:45 am
Location: Østfold - Norway
Contact:

Re: Speed Limit Bridged Port

Thu Jun 28, 2012 10:56 pm

this should be possible using pcq queue's per interface.
 
psychoplot
just joined
Topic Author
Posts: 5
Joined: Sat Apr 02, 2011 5:58 pm

Re: Speed Limit Bridged Port

Fri Jun 29, 2012 12:50 am

this should be possible using pcq queue's per interface.
Any helpful articles or videos on that? Thanks!
 
taduikis
Member
Member
Posts: 436
Joined: Sat Jul 07, 2007 12:09 pm

Re: Speed Limit Bridged Port

Fri Jun 29, 2012 1:18 am

Hmm. I do see settings for Rx and Tx in interface config dialog and you can set any limit you want in kilobits (k) or megabits (M). I haven't tried this setting though, so can't tell more..
You can only limit the download speed by the interface...and it is their defined speeds as well... you can not limit the upload....
 
samsung172
Forum Guru
Forum Guru
Posts: 1191
Joined: Sat Apr 04, 2009 3:45 am
Location: Østfold - Norway
Contact:

Re: Speed Limit Bridged Port

Sun Jul 01, 2012 10:20 pm

Who is online

Users browsing this forum: No registered users and 71 guests