RB1100 ROS 5.19 - problem with a high load on the router.
I've attached a screenshot to the post.

Hello Folks!

is it safe to upgrade till 5.19 now, we would like to move on ?

We have all our devices 5.18, no problems at all, sometimes we still got snmp causing 100% CPU activities, but not to often.

Always test first Steen on a spare device and try and replicate your configuration.

What works for me and is 100% stable might be different for you.

Always test first Steen on a spare device and try and replicate your configuration.

What works for me and is 100% stable might be different for you.

Yupp
We always do, first test environment, then preprod and lastly production. Current minus one..
I will still wait some days and see what comes up.

[Ticket#2012080166000114] RE: RB751U-2HnD - Reboot

13 day ago. Received only autoreply.

Today 2 reboots.

Hello Folks!

Majority of our RB411 boards, RB333, RB600, RB750G, RB450G, SXT-5D is now updated to 5.19.
No problems so far, all working fine, noticed little less CPU on some boards to

In 5.18 two times on SXT-5D, we did experience some SNMP high CPU consumptions that took 100% CPU, dieable and enable SNMP solved the case, for returning some month later. Also RoS <5.18 in past we did have same issue on RB333 boards and also on RB450G, it has fully dissapaired in 5.18 and up. Now and then we face an crashed console, nothing that affects any production

Good work MT!

I have major problem with RB411UAHL related or same issue with this http://forum.mikrotik.com/viewtopic.php?t=25820.
Even already upgraded become v5.19, this issue still occur.
When we downgrade this mikrotik become v4.17, the device become cannot be access.
Trying netinstall, but no luck. Trying to reset, still cannot be access. The only thing that I can found after downgrade become 4.17 is only one beeping sound and then there's no second beep sound heard any more after that.

Any advice for this?
Thanks for any suggestion,

I have major problem with RB411UAHL related or same issue with this http://forum.mikrotik.com/viewtopic.php?t=25820.
Even already upgraded become v5.19, this issue still occur.
When we downgrade this mikrotik become v4.17, the device become cannot be access.
Trying netinstall, but no luck. Trying to reset, still cannot be access. The only thing that I can found after downgrade become 4.17 is only one beeping sound and then there's no second beep sound heard any more after that.

Any advice for this?
Thanks for any suggestion,

become to back 4.17 . Also reset all yout routerboard and downgrade 4.x.x version