Hello,
Case: we have a L2 wireless network in a ring topology. On the ring we have a couple of 100s routers (RB450G). Every router has its own IP network class for customers and APs. Routers (R1-R16) are facing L2 ring on eth1, other ports are connected to APs. On the network we run OSPF. Routers A-D (RB1200) are core routers connected to internet.
A----R1----R2----R3----R4----R5----R6----R7---C
|....................................................|
R16................................................R8
|....................................................|
B ---R15---R14---R13---R12---R11---R10---R9-D
(replace dots with space)
What I would like to accomplish is redundancy and "load balancing". For load balancing I am satisfied to balance it manually or if there is a way to do a near equal cost multipath I am open to suggestions. Example: Routers R1-R4 must go to A if it is reachable otherwise go to nearest router, etc. Usually I will do this with path cost but as our network is L2 it would not work for this case or I am wrong?
Any ideas how to accomplish this?
Mitja
