Community discussions

MikroTik App
 
lousx
newbie
Topic Author
Posts: 29
Joined: Mon Jan 21, 2013 8:04 am

Give to local device public ip address (without nat)

Wed Apr 10, 2013 9:22 am

Have LAN address: 192.168.0.0/16

We have AS and the address pool: xxx.234.147.0/24

Configured bgp.

Configured dst-nat.

Everything works.

But there is one problem. We need to give the local device IP Address from xxx.234.147.0/24. for example xxx.234.147.12

How to set it up?

Sorry for my English.
 
lousx
newbie
Topic Author
Posts: 29
Joined: Mon Jan 21, 2013 8:04 am

Re: Give to local device public ip address (without nat)

Wed Apr 10, 2013 2:04 pm

Help me please!
 
lousx
newbie
Topic Author
Posts: 29
Joined: Mon Jan 21, 2013 8:04 am

Re: Give to local device public ip address (without nat)

Thu Apr 11, 2013 11:07 am

Heeeeeeeeeeeeelp!
 
User avatar
nickshore
Long time Member
Long time Member
Posts: 521
Joined: Thu Mar 03, 2005 4:14 pm
Location: Suffolk, UK.
Contact:

Re: Give to local device public ip address (without nat)

Thu Apr 11, 2013 11:34 am

Do you have another IP range for the WAN connection ? a /30 from your ISP ?

You can put an IP from the /24 block onto the LAN eg xxx.234.147.1/24

Then you can disable your NAT rule.

Then local devices can have an address in xxx.234.147.0/24 and use xxx.234.147.1/24 as their gateway.

Hope that helps
Nick.
 
lousx
newbie
Topic Author
Posts: 29
Joined: Mon Jan 21, 2013 8:04 am

Re: Give to local device public ip address (without nat)

Fri Apr 12, 2013 8:21 am

Thank you.
But I want to use NAT and at the same time give the public ip to one device
 
vadyalex
newbie
Posts: 47
Joined: Tue Jan 17, 2012 11:03 pm

Re: Give to local device public ip address (without nat)

Fri Apr 12, 2013 10:45 am

I suggest you to set the NAT and port-forward necessary port to target machine.

Cheers.
 
lousx
newbie
Topic Author
Posts: 29
Joined: Mon Jan 21, 2013 8:04 am

Re: Give to local device public ip address (without nat)

Mon Apr 15, 2013 9:34 am

I need to have a working station was only a public ip address.
Thanks.
 
rjickity
Member Candidate
Member Candidate
Posts: 212
Joined: Sat Jul 17, 2010 10:40 am
Location: Perth, Australia

Re: Give to local device public ip address (without nat)

Mon Apr 15, 2013 12:25 pm

Take a subnet out of your range, create a vlan(assuming you are using a switch) address the vlan and then add your hosts to that vlan with an address in the subnet you made and a gateway of your router address you put on the vlan interface. A standard '3 leg perimeter' firewall type setup

Sent from my GT-I9100 using Tapatalk 2

Who is online

Users browsing this forum: Ahrefs [Bot], xrlls and 80 guests