Hi I could use some help implementing PCQ in my routerboard. I wanted to use PCQ to distribute bandwith equally between 3 networks and if there are no clients in one of the networks then allocate these bandwith to the other 2 networks and so on. The network diagram is like follows:
As you can see in the pic interfaces eth4 and eth5 wich im using to prove the concept are totally uneven on bandwith allocation
Also attached my whole config file:
I'll appreciate any help
I have been working in the configuration to prove the concept in only 2 networks but it doesn't seem to work, having clients on both networks the bandwith distribution is not equal between them. Refer to the following pic: