where can i find routeros 6.2 changelog

What's new in 6.2 (2013-Jul-16 13:48):

*) dhcp server - framed routes are now also added to the server routing table;
*) dhcpv6 server - added binding-script option;
*) proxy - allow multiple src-address for ipv4 and ipv6;
*) eoip,gre tunnels could occasionally crash multicore router;
*) fixed bug - sometimes some types of interfaces would stop working;
*) ipsec sometimes could crash kernel on CCR;
*) connection tracking sometimes could crash kernel on CCR;
*) ppp,pptp,l2tp,sstp - added default-route-distance parameter;
*) scep - "/cert scep ra" merged into "/cert scep client" without saving ra config;
*) ipsec - fix phase1 autonegotiation on little endian platforms;
*) pppoe server - allow service with empty service-name to accept all pppoe clients;
*) lcd - current-screen option is replaced with "/lcd show" command
*) lcd - current-interface option is replaced with "/lcd interface display" command
*) graphing - make graphs stable on ppp & ovpn interfaces;
*) www, hotspot - fixed problem when www service stopped responding on high load;
*) winbox, webfig: allow to enter space in the text fields;
*) webfig - fixed configuration of VPLS & routing filters;
*) lcd - added option for enabling or disabling the touch screen;
*) lcd - added options for screen switching;
*) lcd - up to 10 non-physical interfaces can now be added to the lcd;
*) lcd - all interface graph screen can now be customized from /lcd interface page;
*) backup - changed default backup file name to <id>-<YY><MM><DD>-<HHMM>.backup
for file browsers to sort them properly;
*) webfig - it did not work in Opera;
*) webfig - made terminal work again;
*) winbox - added ability to fully set up traffic generator in winbox;
*) trafficgen - allow ranges for ip addrs and udp ports;
*) queue simple - fixed bug - actual queue order sometimes was wrong;
*) queue simple - queue is not invalid when at least one of target interfaces is up;
*) fixed crash when setting master-port on AR8327 switch chips;
*) fixed addresslist - dynamic entries sometimes would still
show up even afther being timed out;

thanks dear

Hello Normis,

when you will be available to download the version 6.2?

Regards,

where can i find routeros 6.2 changelog

Normis just posted the Changelog!

What's new in 6.2 (2013-Jul-16 13:48):

*) dhcp server - framed routes are now also added to the server routing table;
*) dhcpv6 server - added binding-script option;
*) proxy - allow multiple src-address for ipv4 and ipv6;
*) eoip,gre tunnels could occasionally crash multicore router;
*) fixed bug - sometimes some types of interfaces would stop working;
*) ipsec sometimes could crash kernel on CCR;
*) connection tracking sometimes could crash kernel on CCR;
*) ppp,pptp,l2tp,sstp - added default-route-distance parameter;
*) scep - "/cert scep ra" merged into "/cert scep client" without saving ra config;
*) ipsec - fix phase1 autonegotiation on little endian platforms;
*) pppoe server - allow service with empty service-name to accept all pppoe clients;
*) lcd - current-screen option is replaced with "/lcd show" command
*) lcd - current-interface option is replaced with "/lcd interface display" command
*) graphing - make graphs stable on ppp & ovpn interfaces;
*) www, hotspot - fixed problem when www service stopped responding on high load;
*) winbox, webfig: allow to enter space in the text fields;
*) webfig - fixed configuration of VPLS & routing filters;
*) lcd - added option for enabling or disabling the touch screen;
*) lcd - added options for screen switching;
*) lcd - up to 10 non-physical interfaces can now be added to the lcd;
*) lcd - all interface graph screen can now be customized from /lcd interface page;
*) backup - changed default backup file name to <id>-<YY><MM><DD>-<HHMM>.backup
for file browsers to sort them properly;
*) webfig - it did not work in Opera;
*) webfig - made terminal work again;
*) winbox - added ability to fully set up traffic generator in winbox;
*) trafficgen - allow ranges for ip addrs and udp ports;
*) queue simple - fixed bug - actual queue order sometimes was wrong;
*) queue simple - queue is not invalid when at least one of target interfaces is up;
*) fixed crash when setting master-port on AR8327 switch chips;
*) fixed addresslist - dynamic entries sometimes would still
show up even afther being timed out;

Hi, Normis! do you have the download link?

Thanx!

v6.2 is here: http://www.mikrotik.com/download/share/ ... be-6.2.npk (MIPS-BE). Change the name to get other build files.
From Normis post in this topic: http://forum.mikrotik.com/viewtopic.php?f=2&t=51835

Normis check userman part ... there is people say that have problems with paypal http://forum.mikrotik.com/viewtopic.php?f=10&t=73813

v6.2 is here: http://www.mikrotik.com/download/share/ ... be-6.2.npk (MIPS-BE). Change the name to get other build files.
From Normis post in this topic: http://forum.mikrotik.com/viewtopic.php?f=2&t=51835

Thank you!

There is no support for "Multicast" in the v6.2 package.

No mention of script fixes. Anyone had a chance to test previously working scripts on 6.2 yet?

No mention of script fixes. Anyone had a chance to test previously working scripts on 6.2 yet?

all scripts are working, check if you have updated your scripts for the v6 commands and features

There is no support for "Multicast" in the v6.2 package.

clarify please, what is not working

all scripts are working, check if you have updated your scripts for the v6 commands and features

Sorry, are you implying there were no scripting bugs with 6.1?

There are a few issues, but they are not fixed in the above build, that's why they are not in the changelog. Which specific issue are you talking about?

for the multicast to work, you need package that has multicast stuff in it.

here are archive with some additional packages:
http://www.mikrotik.com/download/share/ ... es_6.2.zip

There are a few issues, but they are not fixed in the above build, that's why they are not in the changelog. Which specific issue are you talking about?

Ok, thanks for confirmation. My issues are in ticket #2013061866000451. Please could you fix them in 6.3? The scripting API is very important to us.

v6.2 is not released, this is only a discussion about it. the issues will be fixed before we release v6.2

Do you plan any wireless improvements?

We always "plan for improvements"

Hi normis, and the rest of MT team

I've tried v6.2 (build 2013-Jul-08 AND 2013-Jul-16)
Error in 2013-Jul-16 13:48:
- Error URL redirection in hotspot (if we type ex: http://www.mikrotik.com before login, the browser is not redirected to login page)

In v6.2 (2013-Jul-08) and v6.1, no such problem exist

That's it for now

Happy Fasting...

Error in 2013-Jul-16 13:48:
- Error URL redirection in hotspot.

New build has this issue fixed, always make sure to test new build (Jul 17) before reporting issues

We always "plan for improvements"

MT is always take care for Improvements--
that Improvements needs Improvements

We always "plan for improvements"

I thing wireless improvements in 6.2? If yes, then what?

v6.2 is not released, this is only a discussion about it. the issues will be fixed before we release v6.2

Even better, thanks!

Error in 2013-Jul-16 13:48:
- Error URL redirection in hotspot.

New build has this issue fixed

Great, i'll try it later...

always make sure to test new build (Jul 17) before reporting issues

lol i just trying to test based on the changelog date

What's new in 6.2 (2013-Jul-16 13:48):

Changelog maybe is not updated yet. Builds take place nearly every day, sometimes - many times per day

Changelog maybe is not updated yet. Builds take place nearly every day, sometimes - many times per day

that's why i put the info (build date and time) of my test

Thank you MT team

Do you intend to address this issue as well. I'm quite sure that it is a bug, because I get different results depending from where I configure DHCPv6 bindings. From the terminal it show IPv6 servers, from Winbox and Webfig it show IPv4 servers.

http://forum.mikrotik.com/viewtopic.php?f=1&t=72495

*) ipsec - fix phase1 autonegotiation on little endian platforms;

Does this mean that on x86 and mipsbe the problem still exists?

There are a few issues, but they are not fixed in the above build, that's why they are not in the changelog. Which specific issue are you talking about?

Regarding scripting errors, please see http://forum.mikrotik.com/viewtopic.php?f=1&t=73772

Although the additional output produced by running scripts in 6.1 may be annoying, the larger problem is that many scripts no longer run successfully in 6.1 as the did in 6.0 and prior revisions. this is definitely not due to changes in the format of commands in 6.1 over previous releases of ROS

For example: "the expansion of local variables now produces a syntax error"

This was a significant (and perhaps an unintended) change such that scripts no longer execute successfully.

*) ipsec - fix phase1 autonegotiation on little endian platforms;

Does this mean that on x86 and mipsbe the problem still exists?

x86 and mipsle are little endian - as the problem could have been observer only on those platforms, it is fixed now. MIPSbe has never seen the issue.

It's Friday - favorite day
Publish 6.2 today?

*) ipsec - fix phase1 autonegotiation on little endian platforms;

Does this mean that on x86 and mipsbe the problem still exists?

x86 and mipsle are little endian - as the problem could have been observer only on those platforms, it is fixed now. MIPSbe has never seen the issue.

Oops! My bad. I thought it was referring to mipsle.

Great news then! Thanks


Any news about running Mikrotik 6.x on XenServer?

It causes a kernel panic
http://forum.mikrotik.com/viewtopic.php?f=2&t=74065
http://forum.mikrotik.com/viewtopic.php ... 77#p374777

NDIS for 3g modem is supported in this version or not??
Thank you so much

IPSec still not working properly on 6.2

With only one ipsec peer configured it works. But if I add a second it won't work.

I can confirm same: on mipsbe (tested on RB750,RB750G and RB2011) IPSec doesn't works well with multiple IPSec peers. I'm able to use it with 2 peers, but not with more than two. However I'm not sure if number of peers are causing the issue.

Note: by switching Exchange mode from main to aggressive I have managed to connect to my other peers.

IPSec still not working properly on 6.2

With only one ipsec peer configured it works. But if I add a second it won't work.

IPSec still not working properly on 6.2

With only one ipsec peer configured it works. But if I add a second it won't work.

I can confirm same: on mipsbe (tested on RB750,RB750G and RB2011) IPSec doesn't works well with multiple IPSec peers. I'm able to use it with 2 peers, but not with more than two. However I'm not sure if number of peers are causing the issue.

Note: by switching Exchange mode from main to aggressive I have managed to connect to my other peers.

Report to support@mikrotik.com so they can fix it.

I can confirm same: on mipsbe (tested on RB750,RB750G and RB2011) IPSec doesn't works well with multiple IPSec peers. I'm able to use it with 2 peers, but not with more than two. However I'm not sure if number of peers are causing the issue.

Note: by switching Exchange mode from main to aggressive I have managed to connect to my other peers.

IPSec still not working properly on 6.2

With only one ipsec peer configured it works. But if I add a second it won't work.

It really depends on peer config, to tell more write to support with attached supout file.

6.2 is still need to LAB test ?

or released today ?

6.2 is still need to LAB test ?

or released today ?

It is not released

ppp,pptp,l2tp,sstp - added default-route-distance parameter

cant wait to test in real environment. One of the most important function for me.

Release 22jul13

Still no PayPal function. RB doesn't accept "return" from Paypal after payment.

Works fine in ROS5.25

RGDS

Release 22jul13

Still no PayPal function. RB doesn't accept "return" from Paypal after payment.

Works fine in ROS5.25

RGDS

have you contacted support with supout.rif file and remote access? we can't repeat it, we must see your system

See also http://forum.mikrotik.com/viewtopic.php?f=10&t=73813

Normis - I cannot give you remote access to a 6.1 system as with it not working, we had to go back to 5.25 very quickly, where it works some of the time. We still get a lot of timed out errors but if the customer creates a new account and tries PayPal again, he is sometimes lucky.

Release 22jul13

Still no PayPal function. RB doesn't accept "return" from Paypal after payment.

Works fine in ROS5.25

RGDS

have you contacted support with supout.rif file and remote access? we can't repeat it, we must see your system

Many times Ticket#2013071766000184, Ticket#2013062266000354

netwatch became dysfunctional (does not work)
character encoding comment Unicode UTF-8
He was probably a problem that disappeared from the national characters of the rules in Winbox. Currently written notes are displayed correctly. Terminal no UTF-8

Thanks for providing the link to the pre-release builds. Is there a pre-release changelog that is updated - even if not kept up to date daily - that kinda shows whats been done since previous build? Can someone provide a link for it if it exists please... thanks

i'm testing 6.2 on x86 esxi 5.1 virtual machine... 3 nic - intel 1000e
max uptime 2-3days
problem - network randomly shutdown...
system normal respond on console, and all network interfaces can see in /interfaces print and all link is up
6.1 have same problem too...
any ideas?

i'm testing 6.2 on x86 esxi 5.1 virtual machine... 3 nic - intel 1000e
max uptime 2-3days
problem - network randomly shutdown...
system normal respond on console, and all network interfaces can see in /interfaces print and all link is up
6.1 have same problem too...
any ideas?

No problem here with v6.x on ESXi 5.1. Works perfect.

i'm testing 6.2 on x86 esxi 5.1 virtual machine... 3 nic - intel 1000e
max uptime 2-3days
problem - network randomly shutdown...
system normal respond on console, and all network interfaces can see in /interfaces print and all link is up
6.1 have same problem too...
any ideas?

No problem here with v6.x on ESXi 5.1. Works perfect.

the same here: uptime is 43 days, 70 TiB of traffic passed through the router, no problems observed

i'm testing 6.2 on x86 esxi 5.1 virtual machine... 3 nic - intel 1000e
max uptime 2-3days
problem - network randomly shutdown...
system normal respond on console, and all network interfaces can see in /interfaces print and all link is up
6.1 have same problem too...
any ideas?

Did you upgrade with the latest patches from VMware?

RB1200 downgrade from 6.2 --> 5.25

Power cycle needed

i'm testing 6.2 on x86 esxi 5.1 virtual machine... 3 nic - intel 1000e
max uptime 2-3days
problem - network randomly shutdown...
system normal respond on console, and all network interfaces can see in /interfaces print and all link is up
6.1 have same problem too...
any ideas?

I can actually confirm this.

I have 5 VM Routers, only one randomly stops network traffic tho.
Gonna try to recreate VM and reinstall ROS, I will see if that helps or not.

I have 5 VM Routers, only one randomly stops network traffic tho.
Gonna try to recreate VM and reinstall ROS, I will see if that helps or not.

I had this issue before I upgraded ESXi 5.1 with the latest patches.

Testing the version 6.2 on RB751U-2HnD:

• After "reset-configuration" does not enter by MAC Address.
• After "reset-configuration" enters through IPv6 only.
• There are the default script for the equipment.
• SNTP Client not updated.

Testing the version 6.2 on RB751U-2HnD:

• After "reset-configuration" does not enter by MAC Address.
• After "reset-configuration" enters through IPv6 only.
• There are the default script for the equipment.
• SNTP Client not updated.

because reset disables MAC access on Ether1. Did you connect from ports 2-5?

I had this issue before I upgraded ESXi 5.1 with the latest patches.

I am currently running 5.1 U1 and I still have this issue.

Would you happen to remember which patch solved it? I looked through the patches, but couldnt see anything relating to this issue.

I had this issue before I upgraded ESXi 5.1 with the latest patches.

I am currently running 5.1 U1 and I still have this issue.

Would you happen to remember which patch solved it? I looked through the patches, but couldnt see anything relating to this issue.

I cannot say what solved my isse because I applied every available patch in the end of may 2013. I'm quite sure that the upgrade from 5.1 to 5.1 U1 did not solved anything in my case, therefore I downloaded and applied everything. Now I se that 5.1 U1b has been released, maybe this upgrade will solve your issue.

Hello ,

I have issue with queue simple and tree ,

we use this script for unlimited download from cache proxy , for TOS marking in mangle ,



Now there is no Global-Out just Global and it not work at this script.

if you use Simple Queues for limiting users, you need to create Simple Queue for unlimited traffic