Hi guys:
I would appreciate a bit of help with my current situation:
I have 2 ADSL connections on a RB 750 RouterBoard running 5.4
ether1 is connected to my local network 192.168.3.0/24
ADSL 1: 192.168.3.254 ADSL 2: 192.168.3.253
Running a hotspot on IP 10.5.50.0/24 - ether2 and ether 3 are part of a bridge along with my wlan1 interface and assigning IP's as per normal.
Hotspot it is only using 192.168.3.254
Trying to get to share the load between the 2 gateways, tried a few tutorials I found on mikrotik wiki with no luck:
http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways
Created the groups, the problem I think I have is that the 2 groups I created are as follow:
GroupA : 10.5.50.0/25 - 192.168.3.254
GroupB: 10.5.50.128/25 - 192.168.3.253
I would never reach to 128 for the second ADSL to kick, I want them to somehow do the following, and here is the help I need:
10.5.50.2 to ADSL 1 (192.168.3.254)
10.5.50.3 to ADSL 2 ( 192.168.3.253)
10.5.50.4 to ADSL 1 (192.168.3.254)
10.5.50.5 to ADSL 2 ( 192.168.3.253)
is there any way to achieve this ?
Thank you in advance.
G