Code: Select all
[admin@MikroTik] > ip address add address=xx.yyy.170.50/30 interface=ether1
[admin@MikroTik] > ping xx.yyy.170.49
HOST SIZE TTL TIME STATUS
xx.yyy.170.49 56 255 2ms
xx.yyy.170.49 56 255 2ms
xx.yyy.170.49 56 255 2ms
sent=3 received=3 packet-loss=0% min-rtt=2ms avg-rtt=2ms max-rtt=2ms
[admin@MikroTik] > ip route add gateway=xx.yyy.170.49
[admin@MikroTik] > ping xx.yyy.170.49
HOST SIZE TTL TIME STATUS
xx.yyy.170.49 timeout
xx.yyy.170.49 timeout
xx.yyy.170.49 timeout
xx.yyy.170.49 timeout
sent=4 received=0 packet-loss=100%
For the life of me, I can not figure this out. I've done a reset on the config. I've downgraded to 6.4, brought it back up to 6.5. I haven't tried all the ethernet ports, but I have tried 6 of them before giving up. Every port works with other network configurations, but NOT this one.
I set the IP, check the gateway. After adding the default route, I can no longer ping the gateway (or anything beyond it).
I give up for today, it's time to go home.
Thanks!