So is this a fix in 6.32rc5? I didn't find a place to download 6.32rc5. I triedCHR running on XEN
All the details of the licensing scheme are not yet known or cannot be disclosed. For now, you have limitations of Free tier - that is 1MBps of throughput.
It is expected to be a per-interface limit. Either this limit does not apply to the bandwidth test tool, or you have encountered a build where this limit is (accidentally?) turned off.Interestingly i was able to push gigabit speeds in the test. is the 1Mb/s a routing or inspection throughput limit?
I'm wondering about the same thing. I'd like to deploy a couple of RouterOS instances on the Vultr cloud (https://www.vultr.com) that uses KVM, but they require you to install from an ISO file. The default x86 ISO that Mikrotik provides doesn't have virtio drivers and thus doesn't see a hard disk to install to.Dear,
Can the Cloud Hosted Router itself be a Virtual Router with KVM?
I suppose this will depend in the future on the hosted provider.
Thanks,
Patrick
Can you add both virtio disk and network support to the x86 installer ISO as well? That would be a great addition!network is supported, disk is coming laterVery nice!
Problems I've met are unsupported virtio (disk and network both) and cloud-init to be possible to load on AWS, Openstack, etc..
Yes it can. I'm using it in both KVM and QEMU.Dear,
Can the Cloud Hosted Router itself be a Virtual Router with KVM?
I suppose this will depend in the future on the hosted provider.
Thanks,
Patrick
I just received this info from Vultr's support desk:Can you add both virtio disk and network support to the x86 installer ISO as well? That would be a great addition!network is supported, disk is coming laterVery nice!
Problems I've met are unsupported virtio (disk and network both) and cloud-init to be possible to load on AWS, Openstack, etc..
So apparently there is more interest in running RouterOS in this way, the only thing that's needed to get this working is virtio disk support in the x86 installer-ISO. If Mikrotik needs testers for this just let me know.We do get a number of requests for that particular OS, but enabling IDE has a significant processing overhead.
I don't think they really know Mikrotik RouterOS. If they did they wouldn't say that there will be a significant processing overhead because of IDE.So apparently there is more interest in running RouterOS in this way, the only thing that's needed to get this working is virtio disk support in the x86 installer-ISO. If Mikrotik needs testers for this just let me know.We do get a number of requests for that particular OS, but enabling IDE has a significant processing overhead.
That was my exact responseI don't think they really know Mikrotik RouterOS. If they did they wouldn't say that there will be a significant processing overhead because of IDE.
Once Mikrotik boots it pretty much writes almost nothing to the disk. So there is no disk IO to cause any load
The L2 MTU field is empty. Is this going to change in future releases of the CHR?it is now on the download page. Later builds will include VMXNET3
Code: Select all[admin@MikroTik] > interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS 0 R ether1 ether 1500 00:0C:29:B1:BB:47 1 R ether2 ether 1500 00:0C:29:B1:BB:3D [admin@MikroTik] > sy resource pci print # DEVICE VENDOR NAME IRQ 0 03:00.0 VMware VMXNET3 Ethernet Controller (rev: 1) 11 1 02:00.0 Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (re... 11
on what virtual machine you are running your guest? And yes, that is one of the things for better EC2 integration. We might think of an option to disable that automatic DHCP addition to the interface.Troubles using CHR version:
1) Mikrotik create a dhcp client on ether1. Even if I disable dhcp client or reset the configuration mikrotik always create a dhcp client on ether1 and a get stuck with a automatic default gateway...
2) Is hard to search for neighbours on winbox. Sometimes winbox show but most of time no. Btw I'm running winbox on linux...
I have no such problems using the PC x86 version...
Ok..on what virtual machine you are running your guest? And yes, that is one of the things for better EC2 integration. We might think of an option to disable that automatic DHCP addition to the interface.Troubles using CHR version:
1) Mikrotik create a dhcp client on ether1. Even if I disable dhcp client or reset the configuration mikrotik always create a dhcp client on ether1 and a get stuck with a automatic default gateway...
2) Is hard to search for neighbours on winbox. Sometimes winbox show but most of time no. Btw I'm running winbox on linux...
I have no such problems using the PC x86 version...
Also, using ISO installation you will not be able to install CHR. For now it is deemed as an image that will install on itself at the first boot.
I don't know what is wrong, but in my case it just keeps rebooting on Hyper-V (Running on Windows 10)new images for CHR
http://www.mikrotik.com/download/share/chr_6_32.img
http://www.mikrotik.com/download/share/chr_6_32.vmdk
Hyper-V normal interface is fixed.
their are known issues with hyper-v and some builds of windows 10. is this the insider preview build of windows 10?I don't know what is wrong, but in my case it just keeps rebooting on Hyper-V (Running on Windows 10)new images for CHR
http://www.mikrotik.com/download/share/chr_6_32.img
http://www.mikrotik.com/download/share/chr_6_32.vmdk
Hyper-V normal interface is fixed.
[edit]
I also have tried to start from scratch.
Picked the 6.31 IMG file, converted it for Hyper-V. It runs ok.
Via the system -> packages I checked for updates and update 6.32.1 is available.
Upgrading to this version causes continuous reboots.
[edit2]
'Upgrading' to 6.30.4 causes no interfaces in Hyper-V and also gives me the 24hour limit like I have installed it from the x86 iso image.
[edit3]
Upgrading to the RC branch (6.33rc4) causes the reboot loop.
I didn't read about these as known issues. And I'm running an official version of Windows 10, upgraded from 7, for that matter.their are known issues with hyper-v and some builds of windows 10. is this the insider preview build of windows 10?I don't know what is wrong, but in my case it just keeps rebooting on Hyper-V (Running on Windows 10)new images for CHR
http://www.mikrotik.com/download/share/chr_6_32.img
http://www.mikrotik.com/download/share/chr_6_32.vmdk
Hyper-V normal interface is fixed.
[edit]
I also have tried to start from scratch.
Picked the 6.31 IMG file, converted it for Hyper-V. It runs ok.
Via the system -> packages I checked for updates and update 6.32.1 is available.
Upgrading to this version causes continuous reboots.
[edit2]
'Upgrading' to 6.30.4 causes no interfaces in Hyper-V and also gives me the 24hour limit like I have installed it from the x86 iso image.
[edit3]
Upgrading to the RC branch (6.33rc4) causes the reboot loop.
Any news for XenServer users? The following is still valid for 6.32 on XenServer6.5:
Will this work on XenServer 6.5? I imported the vmdk, gave it 512Mb RAM and got the following error while booting.
Booting Kernel Failed: Invalid argument
Is there something special I need to do?
That would make it useless for XenServer setups. XenServer/XenCenter won't allow live migration of HVM machines until XenTools are installed. XenTools (or open-vm-tools) are not available to install on RouterOS.I am told that CHR will not have its PV-HVM drivers added for XEN, use non-para virtualized environment instead.Janisk: would you include Xen PV-HVM drivers as well, please?
- KVM works now
- HyperV works now
- VmWare works now
- Xen still not :-*
Mikrotik answered this 3 weeks ago -normis, any word on when we might be able to get a trial license w.o the 1mb restriction?
would like to see how mikrotik handles 56gbe and 100gbe interfaces.
All the details of the licensing scheme are not yet known or cannot be disclosed. For now, you have limitations of Free tier - that is 1MBps of throughput.
Exactly the same for me.Any news for XenServer users? The following is still valid for 6.32 on XenServer6.5:
Will this work on XenServer 6.5? I imported the vmdk, gave it 512Mb RAM and got the following error while booting.
Booting Kernel Failed: Invalid argument
Is there something special I need to do?
We are still discussing how this will work on the server and in the RouterOS interface. Managing lots of such subscriptions is not easy. Let's say you have 30 paid subscriptions and 50 trials for 100Mbit and 20 1mbit free ones, and now want to upgrade 10 to 1Gbit and cancel 20 subscriptions
Please, don't post screenshots of wokstation virtual hypervisors, I suggest to post: "config values" for create the Virtual Machine. For example:We are releasing a test version of an exciting new feature - Cloud Hosted Router (CHR).
Those are not installers, but ready disk images.
Just like some people prefer Winbox over CLI, some people have no idea how to use the values you posted. Advanced users don't need instructions at all.Please, don't post screenshots of wokstation virtual hypervisors, I suggest to post: "config values" for create the Virtual Machine. For example:We are releasing a test version of an exciting new feature - Cloud Hosted Router (CHR).
Those are not installers, but ready disk images.
* Create VM for ESXi:
- CPU: 1 core
- GuestOS: Other 64bit
- RAM: 256MB (can be less?)
- HD: Connect as IDE (or SCSI) the VMDK image
- NIC1: e1000 (for management only)
- NIC2: VMXNET3 (ether1, first real port "WAN")
- NIC3: VMXNET3 (ether2, second real port "LAN")
- NIC4: VMXNET3 (ether3, third real port "DMZ")
- NIC5: VMXNET3 (ether4, four real port "OPT")
- No USB
- No Audio
...
So this is more clear and easy to use.
Regards.
O.
Ok! But, please, remember to include "open-vm-tools" in next release!Just like some people prefer Winbox over CLI, some people have no idea how to use the values you posted. Advanced users don't need instructions at all.
Set an IP and login via IP v4 or v6That is most likely a VM software config issue. Depends on how you set up your virtual NIC and how it is connected to the host PC.Can't connect with winbox.
VirtualBox has NAT by default, configure it to use Bridge or reconfigure your network accordingly
what about support for AWS?
Hm. If we use Xen, we don't use KVM - what is a different hypervisor.xen update - in our tests we are running XEN 4.4.1 and there is problem that if you give image file directly guest will not boot up. There is a workaround - you have to run the image for example, in KVM ($kvm chr-6.33rc10.img) and then stop when KVm reboots. After that you will be able to boot this same image as a XEN DOMU
I just updated Vbox to 5.x version from the official linux repo. I now, have the "KVM" option under "Acceleration" tab and it works, VM starts and run.Hi,
Can someone help me figure out why my VirtualBox just shuts down the VM all of a sudden? I can barely reach the login prompt.
Vbox 4.3.30 on OpenSUSE 13.1
I did all the steps in the first post using the .vmdk image, except for setting up Acceleration to KVM, there is no such option in my Vbox.
Exactly the same for me.Any news for XenServer users? The following is still valid for 6.32 on XenServer6.5:
Will this work on XenServer 6.5? I imported the vmdk, gave it 512Mb RAM and got the following error while booting.
Booting Kernel Failed: Invalid argument
Is there something special I need to do?
I've tried under Debian with Xen4.0 and Xen4.1, HVM mode
what is strange, it would like to start linux, but if i press [tab] it says "system"
I suppose you didn't get me wel.Yes it can. I'm using it in both KVM and QEMU.Dear,
Can the Cloud Hosted Router itself be a Virtual Router with KVM?
I suppose this will depend in the future on the hosted provider.
Thanks,
Patrick
well, not only with thruput.you can already use it for tests. As the only limitation is the throughput. And in some cases you have to do a workaround that you have to start it in VirtualBox or KVM and shut-down after initial installation.
Not sure if this is what you are looking for, but RouterOS does not require a clean shutdown. Power off. It doesn't even support shutdown, since it will reboot rather than stay off.Im sorry is this has already been asked, but i can't see it.
Are the Hyper-V integration components going to be added to the CHR?
I have it up and working on the Hyper-V server no problems, but there is no ability shutdown the VM cleanly from the host. Without this, it will make the host wait 15 min for a reboot.
Can you comment on a timeframe for availability? not a release date, more like "planned in Q1 2016"... for planning. I really want to get rid of a certain virtual VPN endpoint
Hi,Currently we only offer the 1Mbit limited version, if you don't need higher sped, just use this image. In future we will offer subscriptions, but I don't think there will be any migration between old license and new.I have been hosting cloud hosted ROS since 2010. Paid for the licenses L4&L5 but, is it possible to upgrade to CHR?
But that causes its own problems.you have to run interface in promiscuous mode if you want to run VRRP on the interfaces.
Well yes, for nowAs it currently stands, this "Cloud Hosted Router" is really more like "RouterOS VM Edition".
Support for Amazon or other services is planned.
yes,as examples, it can also function as a firewall for your server in EC2 ...Well yes, for nowAs it currently stands, this "Cloud Hosted Router" is really more like "RouterOS VM Edition".
Support for Amazon or other services is planned.
What purpose it will serve if hosted in Cloud? Will it be used for VPN or as NTP server?
in our tests there are no issues using either of the interfaces provided by Hyper-V with CHR image. Would like to get more details of your setup.In Hyper-V:
If anyone gets the "bug" that the CHR reboots after setting up SSH keys, please note you have to remove your synthetic NIC and install a "Legacy" NIC.
To save you the time from converting .img to .vhd, here is a download link:
http://home.varlyakov.com:5000/fbsharing/sJOHoXEC
That would be nice!![...]
We will check what is going on on Windows 8.1 and Windows 10 and normal Hyper-V interface.
Importing the raw file into EC2 with their cli tools?you can use this on EC2. It is just not jet available as an AMI provided by us.
We will check what is going on on Windows 8.1 and Windows 10 and normal Hyper-V interface.
It appears that the person is asking for us to add such "virtual switch", it is not there currently, because you are right, Switch is a hardware feature"switch" is about hardware functionality. This menu should be removed on CHR, I think
Normis and Pavel, you're right!It appears that the person is asking for us to add such "virtual switch", it is not there currently, because you are right, Switch is a hardware feature"switch" is about hardware functionality. This menu should be removed on CHR, I think
Hello. How can I get a 60 day trial without the speed limit? Can I upload the configuration when the trial license is used?Andreas, we will have a 60 day trial without the speed limit.
+1Hello. How can I get a 60 day trial without the speed limit? Can I upload the configuration when the trial license is used?Andreas, we will have a 60 day trial without the speed limit.
My problem is that the manual tells a different story:The router will never stop working, regardless of license type or connectivity issues, there will be just some limitation after 2 months after the last license renewal.
If we purchase a perpetual license, I expect it to work 'as sold' perpetually and as the license text above says, 'no limitations enforced'.p-unlimited
The p-unlimited (perpetual-unlimited) license level allows to run CHR indefinitely. It is highest tier license and it has no limitations enforced.
We have working IP connectivity to all MikroTik devices on our network.Like I said, it is not required to contact the Licensing server. Your installation will keep working. Only RouterOS upgrade will not be possible, but if you have no connectivity, that is not possible anyway, or you can organize access when you need to do the upgrade every 6 months or so.
Hello,
I just successfully upload the MikroTik CHR image to Amazon Web Services (AWS) and it works perfectly as router/firewall for the Amazon VPC.
The only problem is that I tried to apply the free trial P-Unlimited license but it did not work. It keeps saying free license and 1 Mbps Rx/Tx.
Is the trial license working properly?. Here are some images:
Best regards.
I tried few times with few versions of CHR image and still get problem... it hangs on boot, same as someone posted allready screenshot.but did anyone from you try the CHR image on Xen ?
CHR is essentially fixing bugs and broadening platforms for the x86 architecture. If you want more bandwidth then pay the extremely cheap price it costs to do so (which btw for the 1Gbit license it is the same price the old license would have cost anyway)Instead fixing bugs, Mikrotik trying to sale the air. I use RouterOS as ESXi guest for over 3 years without stupid 1Mbit limitations.
Hello,
I just successfully upload the MikroTik CHR image to Amazon Web Services (AWS) and it works perfectly as router/firewall for the Amazon VPC.
The only problem is that I tried to apply the free trial P-Unlimited license but it did not work. It keeps saying free license and 1 Mbps Rx/Tx.
Is the trial license working properly?. Here are some images:
Best regards.
can perform updates for stable release?
vm type gen 2
hyper-v image is also broken no boot.
chr-6.34rc19
tryed with and without secureboot enabled.
was able to generate a gen 1 image from the vmdk and it loades w/o issues.
Hello,Please send supout file to MikroTik support.
Hello,
I just successfully upload the MikroTik CHR image to Amazon Web Services (AWS) and it works perfectly as router/firewall for the Amazon VPC.
The only problem is that I tried to apply the free trial P-Unlimited license but it did not work. It keeps saying free license and 1 Mbps Rx/Tx.
Is the trial license working properly?. Here are some images:
Best regards.
Dear,vm type gen 2
hyper-v image is also broken no boot.
chr-6.34rc19
tryed with and without secureboot enabled.
was able to generate a gen 1 image from the vmdk and it loades w/o issues.
if it crashed, it made a "autosupout.rif" file. send it to supportRouterOS CHR, not pppoe-server runs with 31 users or more, it restarts.
ok, ever sent!if it crashed, it made a "autosupout.rif" file. send it to supportRouterOS CHR, not pppoe-server runs with 31 users or more, it restarts.
also after turning the machine off in hyper-v and right clicking export the vm will no longer boot.Hyper-V gen2 is not supported at the moment
vm type gen 2
hyper-v image is also broken no boot.
chr-6.34rc19
tryed with and without secureboot enabled.
was able to generate a gen 1 image from the vmdk and it loades w/o issues.
Pvscsi driver is already included and works fine. The only problem I had, was that vmdk file from MikroTik includes adapter type "ide". VMware Player is happy to change that to pvscsi, but ESXi did not allow me to change it, when I uploaded vmdk file to host. The solution was to convert it:... include in this release for vmware also vmware tools and pvscsi driver?
qemu-img convert -o adapter_type=lsilogic,subformat=monolithicFlat -f vmdk -O vmdk chr-6.34rc19.vmdk chr-6.34rc19-scsi.vmdk
I'm getting this issue as well.Hi,
I'm having a issue with package IPv6. When I enable it in CHR 6.32 using Qemu, the router crashes. Somebody else with the same problem?
Thanks.
Looks like v6.34rc20 has been removed, back to v6.34rc19 as RC.I just upgraded the CHR to v6.34rc20 and now i` m unable to login
I *tried* to update to 6.34rc20 but I get this error message:I just upgraded the CHR to v6.34rc20 and now i` m unable to login
This is also problem of x86 ros running virtually. There should be a way how to extend the booting partition from the ros, because just extending the virtual disk is for nothing. I solved this problem by uninstalling non critical packages, partially updated the remaining and installed the previously removed packages again in the second stage.I *tried* to update to 6.34rc20 but I get this error message:I just upgraded the CHR to v6.34rc20 and now i` m unable to login
ERROR: not enough disk space, 26.3MiB is required and only 17.2MiB is free
This is on the default VHDX version of 6.24rc19 with The Dude package added and running. The default partition is 64MB - we either need a way to increase the partition size during operation (preferably), or during boot (at a minimum). Clearly the 64MB default will be insufficient when deploying this in a production environment and performing additional package installs and updates.
it is not virtual instance template or anything of that sort. It is just an disk image, that you add to the guest instance.also you need to provide correct templates for Hyper_V and VMWare, etc.
what is out there does not even work.
Leon
If you think you will need more storage, you should expand the storage before you install the CHR. Do that using tools provided by the VM. Then when CHR installs itself, you will have access to the larget storage.I *tried* to update to 6.34rc20 but I get this error message:I just upgraded the CHR to v6.34rc20 and now i` m unable to login
ERROR: not enough disk space, 26.3MiB is required and only 17.2MiB is free
This is on the default VHDX version of 6.24rc19 with The Dude package added and running. The default partition is 64MB - we either need a way to increase the partition size during operation (preferably), or during boot (at a minimum). Clearly the 64MB default will be insufficient when deploying this in a production environment and performing additional package installs and updates.
This version indeed seems to be workingIf you think you will need more storage, you should expand the storage before you install the CHR. Do that using tools provided by the VM. Then when CHR installs itself, you will have access to the larget storage.I *tried* to update to 6.34rc20 but I get this error message:I just upgraded the CHR to v6.34rc20 and now i` m unable to login
ERROR: not enough disk space, 26.3MiB is required and only 17.2MiB is free
This is on the default VHDX version of 6.24rc19 with The Dude package added and running. The default partition is 64MB - we either need a way to increase the partition size during operation (preferably), or during boot (at a minimum). Clearly the 64MB default will be insufficient when deploying this in a production environment and performing additional package installs and updates.
Also, 6.34rc21 is available. Did not experience any problems with logging in the router.
Hello,Hello,Please send supout file to MikroTik support.
Hello,
I just successfully upload the MikroTik CHR image to Amazon Web Services (AWS) and it works perfectly as router/firewall for the Amazon VPC.
The only problem is that I tried to apply the free trial P-Unlimited license but it did not work. It keeps saying free license and 1 Mbps Rx/Tx.
Is the trial license working properly?. Here are some images:
Best regards.
I just send an email to support@mikrotik.com with all the information and supout.rif
Note: I generate new keys and try to apply new free trial license but it did not work.
Ticket# 2015121066000478
Best regards.
[admin@router] /system license> print
system-id: kThxxxxx/xx
level: free
Really. When I used the lastest build of qemu, the emulation runs very slow, and the rOS always got 100% of CPU. Emulating with qemu built in GNS3, it's okay. I'll try to use IPv6 package with vbox, and tell you.I'm getting this issue as well.Hi,
I'm having a issue with package IPv6. When I enable it in CHR 6.32 using Qemu, the router crashes. Somebody else with the same problem?
Thanks.
Windows Server 2008 R2
CHR version 6.34rc19
GNS3 ver 1.3.11
Qemu ver 2.4.0 (included version)
If I run the image in Qemu 2.4.93 (the latest build) then it's stable with all packages installed and enabled (well, I didn't install userman)
I would just use Qemu 2.4.93 but it's got a bug in the udp socket netdevice that makes the emulation run VERY slow and eventually crash when used. This is the type of back-end GNS3 makes when you connect an ethernet interface in the network topology, so Qemu 2.4.93 is useless for this....
Feedbacking..Really. When I used the lastest build of qemu, the emulation runs very slow, and the rOS always got 100% of CPU. Emulating with qemu built in GNS3, it's okay. I'll try to use IPv6 package with vbox, and tell you.I'm getting this issue as well.Hi,
I'm having a issue with package IPv6. When I enable it in CHR 6.32 using Qemu, the router crashes. Somebody else with the same problem?
Thanks.
Windows Server 2008 R2
CHR version 6.34rc19
GNS3 ver 1.3.11
Qemu ver 2.4.0 (included version)
If I run the image in Qemu 2.4.93 (the latest build) then it's stable with all packages installed and enabled (well, I didn't install userman)
I would just use Qemu 2.4.93 but it's got a bug in the udp socket netdevice that makes the emulation run VERY slow and eventually crash when used. This is the type of back-end GNS3 makes when you connect an ethernet interface in the network topology, so Qemu 2.4.93 is useless for this....
Could you please share with us the steps you used to import the MikroTik CHR VM to AWS. Thank youHello,
I just successfully upload the MikroTik CHR image to Amazon Web Services (AWS) and it works perfectly as router/firewall for the Amazon VPC.
The only problem is that I tried to apply the free trial P-Unlimited license but it did not work. It keeps saying free license and 1 Mbps Rx/Tx.
Is the trial license working properly?. Here are some images:
Best regards.
Yeah, I worked that out - I re-copied the VHDX, expanded it, started it and now everything lives on Disk2 in the new, expanded VHDX partition. I'm not sure there *was* a "Disk 2" before I expanded, but I can look at some time.If you think you will need more storage, you should expand the storage before you install the CHR. Do that using tools provided by the VM. Then when CHR installs itself, you will have access to the larget storage.I *tried* to update to 6.34rc20 but I get this error message:I just upgraded the CHR to v6.34rc20 and now i` m unable to login
ERROR: not enough disk space, 26.3MiB is required and only 17.2MiB is free
This is on the default VHDX version of 6.24rc19 with The Dude package added and running. The default partition is 64MB - we either need a way to increase the partition size during operation (preferably), or during boot (at a minimum). Clearly the 64MB default will be insufficient when deploying this in a production environment and performing additional package installs and updates.
Also, 6.34rc21 is available. Did not experience any problems with logging in the router.
Could you please share with us the steps you used to import the MikroTik CHR VM to AWS. Thank you
Hello,Hello,
I just upgrade the CHR to the latest RouterOS version (v6.34rc21) but I got the same problem trying to upgrade the free license to any trial version. It still says free but in the MikroTik account appears correctly.
Any news about it?
Best regards.
Thanks. I just wrote the process to import the image to AWS so anyone can test it.Known bug with AWS, are working on it!
do you have any autosupout.rif files on the router? also, create support output file and send it to support.I run the x86 version (6.34r21), pppoe server, works 100%
already aversion CHR (6.34r21) restarts on average 5 minutes.
Hello,on eu-west-1 you can look for this ami: ami-fce6448f
if this works that way.
*** Please give karma ***
Hello,
Here are the steps to upload the CHR to AWS (Amazon Web Services):
......
*** Please give karma ***
we are working to fix the license. And there will be updated AMIs with latest RouterOS release available.
Hello,
It works fine but the license upgrade does not work yet.
Here is the public AMI in us-east-1 (Virginia, EEUU): ami-c6287dac
Best regards.
please provide correct templates for the VMs you are supporting. It takes more time to do it this way. It should be plug and ply. the whole purpose of a template is to have an environment that comes up right away.it is not virtual instance template or anything of that sort. It is just an disk image, that you add to the guest instance.also you need to provide correct templates for Hyper_V and VMWare, etc.
what is out there does not even work.
Leon
You have to create a VM yourself and apply the supplied VHD(x) file as its harddrive.Hi folks....I pulled down the VM images and Hyper-V gets an IMPORT FAILED!
A server Error occurred while attempting to import the virtual machine.
Import failed.
Import failed. Unable to find virtual machine import files under location "D:\xfer\Mikrotik\VM\". You can import a virtual machine
only if you used Hyper-V to create and export it.
I am successfully running two VMs under Hyper-V one from Watchguard for their Dimension server and a w10-32bit image running other Watchguard management tools as well as the Dude windows x86
So how does one get this running please?
Thanks leon
@Janisk:
I have downloaded latest available image today (6.34rc23) but it still keeps rebooting after installation
In the meantime, you can use legacy network adapters. Those work fine.@Janisk:
I have downloaded latest available image today (6.34rc23) but it still keeps rebooting after installation
We are working on the issue regarding WIndows 10 pro and Hyper-V that CHR is going into the reboot loop after the installation is complete. We have test setup working, well, rebooting indefinitely.
In case we are talking about an EC2 AMI image then the number network interfaces are not relevant. It's set during the configuration of the instance. The disk size has to be minimum of 1Gb but I would recommend going with 8Gb. Used to be the default for linux instances.Guys, if you are asking for a template. What should the config be? How many interfaces and disk sizes etc? Is there some common standard?
Hello janisk,we are working to fix the license. And there will be updated AMIs with latest RouterOS release available.
Hello,Im using router CHR on an esx with a vm with 8 cores .
I'm being attack with a simple udp flood and its eating a lot of cpu.
I droped the attack on the firewall but still the resource usage is too much
http://puu.sh/m8n6s/7327dfed8e.png
http://puu.sh/m8mWN/77add21c6a.png
http://puu.sh/m8pPU/8e1fbdf3df.png
Sure:Hello,Im using router CHR on an esx with a vm with 8 cores .
I'm being attack with a simple udp flood and its eating a lot of cpu.
I droped the attack on the firewall but still the resource usage is too much
http://puu.sh/m8n6s/7327dfed8e.png
http://puu.sh/m8mWN/77add21c6a.png
http://puu.sh/m8pPU/8e1fbdf3df.png
Can you share your firewall filter configuration?.
Best regards.
[admin@MikroTik] > /ip firewall filter print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=forward action=drop protocol=udp in-interface=ether1 packet-size=28 log=no log-prefix=""
1 XI chain=forward action=drop protocol=udp in-interface=ether1 dst-port=10091 log=no log-prefix=""
2 ;;; Add address to block list when try to connect fast
chain=input action=add-dst-to-address-list protocol=tcp address-list=blocked-addr address-list-timeout=1d connection-limit=10,32 log=no log-prefix=""
3 XI chain=input action=drop dst-address=167.114.219.211 log=no log-prefix=""
4 chain=input action=drop protocol=udp in-interface=ether1 dst-port=53 log=no log-prefix=""
5 chain=input action=drop connection-state=invalid log=no log-prefix=""
6 chain=forward action=drop connection-state=invalid log=no log-prefix=""
7 XI ;;; SYN Flood protect
chain=forward action=jump jump-target=SYN-Protect tcp-flags=syn connection-state=new protocol=tcp log=no log-prefix=""
8 chain=SYN-Protect action=accept tcp-flags=syn connection-state=new protocol=tcp limit=400,5 log=no log-prefix=""
9 chain=SYN-Protect action=drop tcp-flags=syn connection-state=new protocol=tcp log=no log-prefix=""
[admin@MikroTik] > /ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 XI chain=dstnat action=dst-nat to-addresses=0.0.0.1 protocol=udp dst-address=167.114.219.211 log=no log-prefix=""
1 ;;; 014
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=198.50.192.167 log=no log-prefix=""
2 ;;; 015
chain=srcnat action=src-nat to-addresses=198.50.192.164 src-address=192.168.137.15 log=no log-prefix=""
3 ;;; 015
chain=dstnat action=dst-nat to-addresses=192.168.137.15 dst-address=198.50.192.164 log=no log-prefix=""
4 ;;; 014
chain=srcnat action=src-nat to-addresses=198.50.192.167 src-address=192.168.137.14 log=no log-prefix=""
5 ;;; 043
chain=dstnat action=dst-nat to-addresses=192.168.137.16 dst-address=198.27.86.232 log=no log-prefix=""
6 ;;; 043
chain=srcnat action=src-nat to-addresses=198.27.86.232 src-address=192.168.137.43 log=no log-prefix=""
7 ;;; 016 tsdns1
chain=dstnat action=dst-nat to-addresses=192.168.137.234 protocol=tcp dst-address=198.50.192.165 dst-port=41144 log=no log-prefix=""
8 ;;; 016
chain=dstnat action=dst-nat to-addresses=192.168.137.16 dst-address=198.50.192.165 log=no log-prefix=""
9 ;;; 016 irc
chain=srcnat action=src-nat to-addresses=198.50.192.165 src-address=192.168.137.16 log=no log-prefix=""
10 ;;; 017
chain=dstnat action=dst-nat to-addresses=192.168.137.16 dst-address=198.50.192.166 log=no log-prefix=""
11 ;;; 017
chain=srcnat action=src-nat to-addresses=198.50.192.166 src-address=192.168.137.17 log=no log-prefix=""
12 ;;; 234 tsdns
chain=dstnat action=dst-nat to-addresses=192.168.137.234 dst-address=192.99.203.7 log=no log-prefix=""
13 ;;; 234
chain=srcnat action=src-nat to-addresses=192.99.203.7 src-address=192.168.137.234 log=no log-prefix=""
14 ;;; 037
chain=dstnat action=dst-nat to-addresses=192.168.137.37 dst-address=198.50.154.174 log=no log-prefix=""
15 ;;; 037
chain=srcnat action=src-nat to-addresses=198.50.154.174 src-address=192.168.137.37 log=no log-prefix=""
16 ;;; 041
chain=dstnat action=dst-nat to-addresses=192.168.137.41 dst-address=198.100.152.246 log=no log-prefix=""
17 ;;; 041
chain=srcnat action=src-nat to-addresses=198.100.152.246 src-address=192.168.137.41 log=no log-prefix=""
18 ;;; 057 ntopng
chain=dstnat action=dst-nat to-addresses=192.168.137.57 dst-address=142.4.206.216 log=no log-prefix=""
19 ;;; 057
chain=srcnat action=src-nat to-addresses=142.4.206.216 src-address=192.168.137.57 log=no log-prefix=""
20 ;;; 066 ts3ca no publicado
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.211 log=no log-prefix=""
21 ;;; 066
chain=srcnat action=src-nat to-addresses=167.114.219.211 src-address=192.168.137.66 log=no log-prefix=""
22 ;;; 067 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=198.50.239.113 log=no log-prefix=""
23 ;;; 067
chain=srcnat action=src-nat to-addresses=198.50.239.113 src-address=192.168.137.66 log=no log-prefix=""
24 ;;; 068 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=198.50.158.222 log=no log-prefix=""
25 ;;; 068
chain=srcnat action=src-nat to-addresses=198.50.158.222 src-address=192.168.137.66 log=no log-prefix=""
26 ;;; 069 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=198.50.155.239 log=no log-prefix=""
27 ;;; 069
chain=srcnat action=src-nat to-addresses=198.50.155.239 src-address=192.168.137.66 log=no log-prefix=""
28 ;;; 070 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=198.50.155.145 log=no log-prefix=""
29 ;;; 070
chain=srcnat action=src-nat to-addresses=198.50.155.145 src-address=192.168.137.66 log=no log-prefix=""
30 ;;; 071 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=142.4.201.104 log=no log-prefix=""
31 ;;; 071
chain=srcnat action=src-nat to-addresses=142.4.201.104 src-address=192.168.137.66 log=no log-prefix=""
32 ;;; 072 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=158.69.3.137 log=no log-prefix=""
33 ;;; 072
chain=srcnat action=src-nat to-addresses=158.69.3.137 src-address=192.168.137.66 log=no log-prefix=""
34 ;;; 073
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.210 log=no log-prefix=""
35 ;;; 073
chain=srcnat action=src-nat to-addresses=167.114.219.210 src-address=192.168.137.66 log=no log-prefix=""
36 ;;; 074 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=158.69.3.116 log=no log-prefix=""
37 ;;; 074
chain=srcnat action=src-nat to-addresses=158.69.3.116 src-address=192.168.137.66 log=no log-prefix=""
38 ;;; 075 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=198.27.88.239 log=no log-prefix=""
39 ;;; 075
chain=srcnat action=src-nat to-addresses=198.27.88.239 src-address=192.168.137.66 log=no log-prefix=""
40 ;;; 076 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.207 log=no log-prefix=""
41 ;;; 076
chain=srcnat action=src-nat to-addresses=167.114.219.207 src-address=192.168.137.66 log=no log-prefix=""
42 ;;; 077
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.208 log=no log-prefix=""
43 ;;; 077
chain=srcnat action=src-nat to-addresses=167.114.219.208 src-address=192.168.137.66 log=no log-prefix=""
44 ;;; 078
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.209 log=no log-prefix=""
45 ;;; 078
chain=srcnat action=src-nat to-addresses=167.114.219.209 src-address=192.168.137.66 log=no log-prefix=""
46 ;;; 079 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.213 log=no log-prefix=""
47 ;;; 079
chain=srcnat action=src-nat to-addresses=167.114.219.213 src-address=192.168.137.66 log=no log-prefix=""
48 ;;; 080
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.214 log=no log-prefix=""
49 ;;; 080
chain=srcnat action=src-nat to-addresses=167.114.219.214 src-address=192.168.137.66 log=no log-prefix=""
50 ;;; 081
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.215 log=no log-prefix=""
51 ;;; 081
chain=srcnat action=src-nat to-addresses=167.114.219.215 src-address=192.168.137.66 log=no log-prefix=""
52 ;;; 082 ts3ca
chain=dstnat action=dst-nat to-addresses=192.168.137.66 dst-address=167.114.219.216 log=no log-prefix=""
53 ;;; 082
chain=srcnat action=src-nat to-addresses=167.114.219.216 src-address=192.168.137.66 log=no log-prefix=""
54 ;;; General rule
chain=srcnat action=masquerade src-address=192.168.137.0/24 out-interface=ether1 log=no log-prefix=""
The error clearly says your PC disk is fulltried everything and keep getting this error
The error clearly says your PC disk is fulltried everything and keep getting this error
I'm getting same error here....tried everything and keep getting this error
that didnt work i did try it as you say with the swap filesRight-click the VM and go to Edit Settings > Options tab > Swapfile location. Select one of the other options ("Always store with the virtual machine" is recommended and will probably work for you since that datastore has a lot of free space). As far as cleaning up that datastore, you can right-click it and Browse and poke around to see what kind of files are taking up the space. It may be likely that your host is configured to use a different datastore for all VMs by default and it is just taken up by swap files at this point.
ploquets - there an issue on ESXi and XVM (including Amazon) that when you want to import the installer image that is provided on the download page you have to run through the installer and then that image should be used in AMI or virtual machine creation on XEN, ESXi or Amazon (that is XEN)
DataStore has plenty space... datastore has a lot of free space). As far as cleaning up that datastore, you can right-click it and Browse and poke around to see what kind of files are taking up the space. It may be likely that your host is configured to use a different datastore for all VMs by default and it is just taken up by swap files at this point.
Hello dirtonth,Hey Guys,
I am using CHR on AWS using the AMI you provided, and upgraded it to the latest RC30.
Everytime the router is restarted, the hostname changes to the reverse-dns. Is there a way of blocking this from happening ?
Thanks,
Matthew.
The only way around that issue with ESXi that I have found so far is to first run the disk in VMware Workstation and let it install. Then export the working VM to an OVA or OVF and use that via "deploy ova" in the Vsphere client. It's the only way I have been able to successfully deploy CHR on ESXi.DataStore has plenty space... datastore has a lot of free space). As far as cleaning up that datastore, you can right-click it and Browse and poke around to see what kind of files are taking up the space. It may be likely that your host is configured to use a different datastore for all VMs by default and it is just taken up by swap files at this point.
Even after changing the swap files for every possible option, I get same error.
Seems that the VMware snapshot engine is causing this, because the error is at the .s001 which seems to be linked with the snapshot system.
But I've tried to make the disk Independent (supposedly will disable snapshot engine) but it fails again.
there are problems on Windows 10 Pro Hyper-V, probably you have the same problem on your version of Windows. We are working on the issue for Windows 10 Pro at the moment. From get go we tested on Windows server.Just downloaded chr-6.34rc30.vhdx. It looks like it gets stuck trying to start services and reboots itself.
Windows 8.1 - Hyper-v
VM has 2GB of ram (tried 512MB also)
Anyone have a link to an older RC that I can try ?
*Edit*
Scratch that, looks like RC 30,29,21 all seem to reboot continuously. Anyone have a recommendation?
*Edit 2*
Scratch all of this. It looks like the CHR will not boot / function on my laptop (Win 8.1 64bit) with Hyper-v (possibly something broken on my end). Looks like the VM boots on a test bed server 2012R2 + Hyper-v.
The only way around that issue with ESXi that I have found so far is to first run the disk in VMware Workstation and let it install. Then export the working VM to an OVA or OVF and use that via "deploy ova" in the Vsphere client. It's the only way I have been able to successfully deploy CHR on ESXi.DataStore has plenty space... datastore has a lot of free space). As far as cleaning up that datastore, you can right-click it and Browse and poke around to see what kind of files are taking up the space. It may be likely that your host is configured to use a different datastore for all VMs by default and it is just taken up by swap files at this point.
Even after changing the swap files for every possible option, I get same error.
Seems that the VMware snapshot engine is causing this, because the error is at the .s001 which seems to be linked with the snapshot system.
But I've tried to make the disk Independent (supposedly will disable snapshot engine) but it fails again.
[/quote]The only way around that issue with ESXi that I have found so far is to first run the disk in VMware Workstation and let it install. Then export the working VM to an OVA or OVF and use that via "deploy ova" in the Vsphere client. It's the only way I have been able to successfully deploy CHR on ESXi.DataStore has plenty space... datastore has a lot of free space). As far as cleaning up that datastore, you can right-click it and Browse and poke around to see what kind of files are taking up the space. It may be likely that your host is configured to use a different datastore for all VMs by default and it is just taken up by swap files at this point.
Even after changing the swap files for every possible option, I get same error.
Seems that the VMware snapshot engine is causing this, because the error is at the .s001 which seems to be linked with the snapshot system.
But I've tried to make the disk Independent (supposedly will disable snapshot engine) but it fails again.
I cant make it start with xen 4.4I also want to use CHR with XenServer 6.5.0 but doesn't start also with viridian=false... what we need to do?
According to meWhy call it "Cloud Hosted"? Is there the ability to actually have a custom RouterOS installation hosted on a general hosting provider (NOT a specialized provider that would let you run custom VMs...)?
Have you guys (at MikroTik) considered maybe offering such a service (preferably one which, just like this VM, has full functionality, but with rate limits). If you do, I for one would certainly end up using it, as right now, to test my API client, I need to set up a VM on my PC, and no 3rd party CI service allows me to do the same with their infrastructure.
As it currently stands, this "Cloud Hosted Router" is really more like "RouterOS VM Edition".
what you did? Did you try to start KVM using this image so that installer finishes and then run XEN using this.There is very large number of people asking for XENSERVER support.
Anyone knows how to fix this?
http://puu.sh/mvStA/c2dfa0360e.png
No, I dont know how KVM works.what you did? Did you try to start KVM using this image so that installer finishes and then run XEN using this.There is very large number of people asking for XENSERVER support.
Anyone knows how to fix this?
http://puu.sh/mvStA/c2dfa0360e.png
Its workingNo, I dont know how KVM works.what you did? Did you try to start KVM using this image so that installer finishes and then run XEN using this.There is very large number of people asking for XENSERVER support.
Anyone knows how to fix this?
http://puu.sh/mvStA/c2dfa0360e.png
I tried kvm img but it fails.
That error can be fixed runing kvm on it?
I got a working img in xen.4.4 , should I try import that image?
Hello mpreissner,Anyone have performance metrics related to AWS instance size? I'm looking at using the CHR as a VPN/Router for a corporate cloud infrastructure, and want to be able to price out the instance sizes in terms of routing performance within the VPC as well as number of concurrent users I can support via VPN (most likely SSTP).
Any info is greatly appreciated!
Hello mpreissner,Anyone have performance metrics related to AWS instance size? I'm looking at using the CHR as a VPN/Router for a corporate cloud infrastructure, and want to be able to price out the instance sizes in terms of routing performance within the VPC as well as number of concurrent users I can support via VPN (most likely SSTP).
Any info is greatly appreciated!
I just launched tree t2.nano instances in VPC in production environment. The performance is very nice. The maximum throughput is like 150 Mbps using that kind of instance (smallest one in AWS). I am using as VPN server and gateway, and also running BGP.
I am very happy with the stability and performance.
I asume that the performance will increase if you use another instance like m3, or bigger.
Best regards.
Sent from my SM-A500Y using Tapatalk
Eventually, this will become available for other architectures too. So yeah, 6.34rc39 for CHR fixes important problem on AWS. So get this if you are launching new instances.@Janisk
For now the 6.34rc39 version is not available. The latest is 6.34rc36.
AtmanActive, am I understanding you correctly that even after generating new System ID it remains the same 'WtgfTcn7YNA'?Hello,
... I get the error message 'ERROR: This System ID with old ID already received trial license key' on the Renew License window where I need to type in my MikroTik shop account username and password.
License window shows System ID 'WtgfTcn7YNA', level 'free', Next Renewal At:'', Deadline At:'', but even when I try 'Generate New ID', still I get the same result.
HiI'm trying to use a CHR as PPPoE Server with Radius authentication.
But every time a client reach a full traffic specified on queue... the CHR reboots.
This happens specially when using a SpeedTest.
If I kill the queue related to the PPPoE client, everything works OK. But then I cannot limit the client.
The queue is generated automatically, but even if I try to setup manually the same kind of queue, same thing happens.
Using latest version 6.34rc34
Please Help!
------------------------------------------------------------------------------------------------------------------------------------
Edit:
I've installed the stable version, 6.33.3 x86 on top of ESXi and everything went well.
Same scenario from the CHR, but CHR reboots it self when queue reaches the top.
It's probably a bug from CHR. Thanks
create support output file on running, then shut down/start and if interface name has changed again - create another support output file and send it to us so we can check what is the issue with this.Ok some more simple tests today in azure, (thanks to support for the test license)
Getting good bandwidth on receive tests inside Azure,
634 Mbps
Having some problems on send tests im looking at, ill update soon
One thing worth noting, every shutdown and restart enables a new interface, so after 7 startups I am on ether7 for my lan interface. This is probably udev related, ive seen this on centos on azure before.
https://azure.microsoft.com/en-us/docum ... hd-centos/
Going to try some vpn tunnels next, I have BGP already runnning over an openvpn tunnel between AWS & AZURE (two private networks, AWS ), very stable & low latency.
What is the trick to get it running in XenServer? All of us are stuck with the dreaded "Booting kernel failed: Invalid argument" message.Got it running on our XenServer 6.5 environment (CHR 6.34rc41)
right now I only see the images on the download page, no 'upgrade' packages.syadnom
whan you mean - upgradable? It should be from the start upgradable to newer version. Only when you run out of the lincese time upgrade is not possible.
Current:right now I only see the images on the download page, no 'upgrade' packages.syadnom
whan you mean - upgradable? It should be from the start upgradable to newer version. Only when you run out of the lincese time upgrade is not possible.
I'm on rc41, but rc45 is available. How do I upgrade?
/system package update
set channel=current
check-for-updates
/system package update
set channel=current
download
/system reboot
/system package update
set channel=release-candidate
check-for-updates
/system package update
set channel=release-candidate
download
/system reboot
I downloaded the VDI image, then made a new VM in VirtualBox with that VDI as hard disk (according howto on page 1). Started the machine in VirtualBox to let the image install. Then exported the machine and imported it in XenServer 6.5 with the profile 'Other install media' and voila it boots!What is the trick to get it running in XenServer? All of us are stuck with the dreaded "Booting kernel failed: Invalid argument" message.Got it running on our XenServer 6.5 environment (CHR 6.34rc41)
I just did it once and have imported the same 'bare image' a bunch of times. Then generate a new ID once you've booted it up. Now that I figured out (...was told what to do...) updating, this is really simple and takes just 30-40 seconds to spawn a new CHR from the template.Any updates on making an OVA so it doesn't take 47 steps to get into vSphere?
I could only find the ami-5081a53a in us-east-1, could not find anything in us-west-1 or us-west-2.for amazon cloud - you have to update to 6.34rc39 or newer.
Here is the new AMI IDs (~1GB of storage):
AMI ID us-west1 ami-8fba10fc (on us-east1 ami-5081a53a)
p.s. if there is important update we will create new AMI image so it is easier to launch as generic CHR as it is possible.
HiHiI'm trying to use a CHR as PPPoE Server with Radius authentication.
But every time a client reach a full traffic specified on queue... the CHR reboots.
This happens specially when using a SpeedTest.
If I kill the queue related to the PPPoE client, everything works OK. But then I cannot limit the client.
The queue is generated automatically, but even if I try to setup manually the same kind of queue, same thing happens.
Using latest version 6.34rc34
Please Help!
------------------------------------------------------------------------------------------------------------------------------------
Edit:
I've installed the stable version, 6.33.3 x86 on top of ESXi and everything went well.
Same scenario from the CHR, but CHR reboots it self when queue reaches the top.
It's probably a bug from CHR. Thanks
I use CHR 6.34rc41 on linux kvm ubuntu 14.04
If I enable mangling rules and queue tree, routeros reboots on queue limit. Seems to be the same bug.
Kind regards
try with at least 128MB of RAM.Using CHR 6.34 on Qemu 2.4.0, I can duplicate the error eugenics61 mentions above with the vmdk, vdi and img images.
Huh... It worked.try with at least 128MB of RAM.Using CHR 6.34 on Qemu 2.4.0, I can duplicate the error eugenics61 mentions above with the vmdk, vdi and img images.
do you have support output file generated for this setup, if so, then send it to support.I'm trying to use a CHR as PPPoE Server with Radius authentication.
But every time a client reach a full traffic specified on queue... the CHR reboots.
This happens specially when using a SpeedTest.
If I kill the queue related to the PPPoE client, everything works OK. But then I cannot limit the client.
The queue is generated automatically, but even if I try to setup manually the same kind of queue, same thing happens.
Using latest version 6.34rc34
Please Help!
------------------------------------------------------------------------------------------------------------------------------------
Edit:
I've installed the stable version, 6.33.3 x86 on top of ESXi and everything went well.
Same scenario from the CHR, but CHR reboots it self when queue reaches the top.
It's probably a bug from CHR. Thanks
I get the following when trying to copy the us-east1 AMI:btw, updated AMI image to the 6.34 new AMI IDs are as follows for the regions eu-west1 ami-7d77c10e, on us-east1 ami-07ddf26d
You can copy the AMI to the other region where you reside.
sorry about that. Snapshots are made public now for US N.Arizona and EU Irelan clusters.
I just noticed that no matter what you set the disk size to on AWS EC2 when launching the official AMI(or copied), it seems to be only around 100MB...sorry about that. Snapshots are made public now for US N.Arizona and EU Irelan clusters.
Hyper-v has given me issues setting the hardware time on Linux vms. I suspect this is just hyper-v being peculiar.Just installing my first install CHR and playing with it. Hyper-V host.
The time service is off. It seems to take the time from the host. But it ignores the datetime offset.
If I configure CHR timezone, the offset gets applied twice Quite obvious for me, as I am in europe, the machine in chicago and the server is running US local time.
In order to get the correct time, I must set it to Etc/GMT+0 - which neither me nor the machine have.
Do you try to use the Hyper-V "Integration feature" of "Time synchronization"? try setting up VMs with that on and off and see if there is a difference. I never have time issues with Time Synchronization on, but I only use Centos 6/7 on Hyper-V, and I always install the hyper-v tools in the guest via yum.Hyper-v has given me issues setting the hardware time on Linux vms. I suspect this is just hyper-v being peculiar.Just installing my first install CHR and playing with it. Hyper-V host.
The time service is off. It seems to take the time from the host. But it ignores the datetime offset.
If I configure CHR timezone, the offset gets applied twice Quite obvious for me, as I am in europe, the machine in chicago and the server is running US local time.
In order to get the correct time, I must set it to Etc/GMT+0 - which neither me nor the machine have.
my bad. Here are new AMIs with 6.34.1 and proper image size: eu-west1 ami-bef141cd; us-east1 ami-3f486355I just noticed that no matter what you set the disk size to on AWS EC2 when launching the official AMI(or copied), it seems to be only around 100MB...sorry about that. Snapshots are made public now for US N.Arizona and EU Irelan clusters.
[admin@] > /system resource print
uptime: 3m39s
version: 6.34 (stable)
build-time: Jan/29/2016 10:25:47
free-memory: 479.0MiB
total-memory: 496.3MiB
cpu: Intel(R)
cpu-count: 1
cpu-frequency: 2400MHz
cpu-load: 0%
free-hdd-space: 64.1MiB
total-hdd-space: 95.2MiB
write-sect-since-reboot: 2224
write-sect-total: 2225
architecture-name: x86_64
board-name: CHR
platform: MikroTik
Trying to import a 245MB Dude export obviously fails because there is not enough storage. Thoughts/Fixes?
This is running on GNS3 I can see the tags by using Wireshark, so the issue is not a lack of support.What virt environment? Some don't support vlans...
did you mean 'use-ip-firewall' in bridge settings? it should not affect Bridge FilterBridge firewall has to be enabled explicitly. It is off by default.