Community discussions

MikroTik App
 
User avatar
MAYAKNET
newbie
Topic Author
Posts: 26
Joined: Wed Mar 12, 2014 10:16 pm
Contact:

CRS212-1G-10S-1S+ - Загрузка процессора 20-30% в холостом режиме.

Mon Sep 21, 2015 6:42 pm

Доброго времени суток.
Есть объяснение этому состоянию?
CRS212-1G-10S-1S+ - Загрузка процессора 20-30% в холостом режиме.

===================================

Good day.
There is an explanation to this state?
CRS212-1G-10S-1S + - 20-30% CPU load at idle.
You do not have the required permissions to view the files attached to this post.
 
User avatar
MAYAKNET
newbie
Topic Author
Posts: 26
Joined: Wed Mar 12, 2014 10:16 pm
Contact:

Re: CRS212-1G-10S-1S+ - Загрузка процессора 20-30% в холостом режиме.

Mon Sep 21, 2015 6:44 pm

Я его снял с задачи, где его состояние 100% загрузки процессора не спускалась.
Пришлось заменить до выяснения причины загруженности процессора

==============================================


I took him to task, where his condition is 100% CPU usage did not go down.
I had to replace up to determine the cause Processor
 
coroslav
just joined
Posts: 24
Joined: Sat Oct 04, 2014 11:44 am

Re: CRS212-1G-10S-1S+ - Загрузка процессора 20-30% в холостом режиме.

Tue Sep 22, 2015 7:47 am

I think something is wrong with newer than v6.15 routeros.
Based on this thread i downgraded (make sure you backup license key!!!)
and with routeros 6.15 now my crs112 (same 400MHz cpu) is USABLE.
http://forum.mikrotik.com/viewtopic.php ... 22#p499480
I hope the problem will be sorted out soon.

But look at "sector writes", it seem to wite way too much..perhaps change Logging, to memory and less rows.
Just an idea.

Who is online

Users browsing this forum: No registered users and 91 guests