Community discussions

MikroTik App
  4. Other topics
  5. RouterBOARD hardware

omnitik going nuts

Post Reply
 
TIQA
just joined
Topic Author
Posts: 15
Joined: Thu Jul 16, 2015 10:06 pm

omnitik going nuts

Thu Sep 24, 2015 3:02 am

hi.

ive been experiencing problems with my omnitik for last couple of weeks. im using it for live sound mixing and its plugged into digital mixing console. so no hardcore rules, just plain AP with 1st port switched instead of gateway. few weeks back i started to notice wifi connection drops, after drop i had to restart router to be able to connect to it again. right now it reboots immediately after anything tries to connect to wifi. signal also disappears suddenly and then shows suddenly. and i have autosupout in files.

have anyone experienced anything like that?
Top
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 282
Joined: Tue Feb 10, 2015 3:21 pm

Re: omnitik going nuts

Thu Sep 24, 2015 2:16 pm

Please use netinstall ro reinstall this device to the latest RouterOS version:
http://wiki.mikrotik.com/wiki/Manual:Netinstall

Also upgrade BIOS:
/system routerboard upgrade

If the problem continiues, send supout file to mikrotik support:
http://www.mikrotik.com/support.html

So we could see if the problem is related to hardware or software.
Top
 
TIQA
just joined
Topic Author
Posts: 15
Joined: Thu Jul 16, 2015 10:06 pm

Re: omnitik going nuts

Thu Sep 24, 2015 4:46 pm

I was unable to boot it in netinstall, none of methods i found online yields any results. Its always boots as usual. This morning i noticed that it started to make some noise, something simillar to 2.5inch disk drive. As soon as there are some net activity, sound is getting more noticable. I havent heard this before, maybe i wasnt paying attention.
Top
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

Thu Sep 24, 2015 5:47 pm

I have noticed such noise from omnitik when transmitting data over wifi so the device drained more electricity power. May happen that some capacitor is going to die and this is the way it expresses itself.
Top
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2879
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: omnitik going nuts

Thu Sep 24, 2015 5:57 pm

Nowadays many devices with electronic high frequency DC-DC converters/transformers are generating noise/screech.
Top
 
Petzl
Member Candidate
Member Candidate
Posts: 214
Joined: Sun Jun 30, 2013 12:14 pm

Re: omnitik going nuts

Fri Oct 02, 2015 1:06 am

I had last summer a omnitik with bad capacitors ...
Top
 
TIQA
just joined
Topic Author
Posts: 15
Joined: Thu Jul 16, 2015 10:06 pm

Re: omnitik going nuts

Sun Oct 11, 2015 3:53 pm

i guess i have broken one, talked with colleagues that have same setup, none of them have any problems.
Top
 
Abuhajir
just joined
Posts: 23
Joined: Tue Sep 29, 2015 11:37 pm

Re: omnitik going nuts

Tue Oct 13, 2015 11:17 am

i guess i have broken one, talked with colleagues that have same setup, none of them have any problems.
I had the exact same problem that u had with the same device .. and I got rid of it .. I think it's sad that mikrotik produced such a device comparing to all great products that they made.

I really hope that they stop making it.
Top
Post Reply

Who is online

Users browsing this forum: holvoetn and 39 guests
  4. Other topics
  5. RouterBOARD hardware