RB3011UiAS-RM

sui13 · Sun Dec 27, 2015 2:22 pm

Could anyone provide info about OSPF or BGP support for this model?

Thanks in advance!

picacho99 · Sun Dec 27, 2015 11:03 pm

My feedback is open and available for anybody that may be interested. If you are right, Mikrotik has lied his customer base because started selling a piece of crap, and I don't believe this is the case.

This young device now is working like a charm, at least, for me. ARM platform only means more raw processing power horse than the platforms used in rb2011 or the rb850x2...

RouterOS is not tipically know to capitalize or benefit from silicon facilities (nat handlers, accelerators,. etc.) but raw CPU power horse. Of course there are exceptions for some specific platforms...these than MIkrotik can afford.

And finally: yes, I'm (really) used to write unix and linux kernel code and drivers...this is only to save some of your time on illustrative comments...

RouterOS seats on top of a linux kernel but in the other side linux kernels for RB3011 CPU platfroms are really stable...so we have to let Mikrotik work on this branch of their RouterOS...

abis · Mon Jan 04, 2016 11:27 am

Hello,

LCD and Switch menu missing... Anyone else have that problem?

Thank you!

p.s. oh, I just saw *) winbox - added LCD menu for RB3011; will be added Switch menu too?

p3rad0x · Thu Jan 14, 2016 6:22 pm

Hi,

I have replaced a 2011 with the new 3011 today,

CPU usage came down from 45% ish to about 10% with the same load, running OSPF.

So far so good.

mavink · Sun Jan 17, 2016 4:13 pm

Hello,

LCD and Switch menu missing... Anyone else have that problem?

Thank you!

p.s. oh, I just saw *) winbox - added LCD menu for RB3011; will be added Switch menu too?

RouterOS 6.33.5 does show the switch menu in Webfig, but I don't see it in the CLI or Winbox. The LCD menu is available in all three interfaces.

Ascendo · Mon Jan 18, 2016 7:48 am

Disappointing that the PSU isn't inside the case.

Mon Jan 18, 2016 8:02 am

Despite the fact that there is a plenty of space for it. Maybe it's cheaper solution.

kiler129 · Mon Jan 18, 2016 2:54 pm

I personally think it's not about space or money, but about huge amount of paperwork and extra certification efforts to put power supply inside.

Mon Jan 18, 2016 4:12 pm

A. Cetrification should be processed in each country where MT sells
B. Some countries have rules , as in Poland, that devices which have PSU inside and 230V connector as a part of a chasis could be repaired/opened only by cerified electricians.
C. Same rules say that such devices should be periodically checked and labelled with some kind of "safe" sticker.

djmanu · Tue Jan 19, 2016 3:24 pm

WHY WHY WHY???

No internal PSU???

I hate external PSU....

This is a verry good universal router for most customers... but external psu on Rackmount Systems is a "no go"

+1 for internal PSU in all Rackmount Systems!

+1 for Redundant PSU in all CCR Systems

DmitryAVET · Tue Jan 19, 2016 6:56 pm

+1 for internal PSU or second DC-jack on PCB like in RB850Gx2

RB2011 / RM3011 (RM) have place for the IEC-socket, but didn't have second dc-jack.

grusu · Thu Jan 21, 2016 11:05 am

Any news about the "Switch" menu in Winbox?
Did not even appear in the latest 6.34rc version.

vitaly2016 · Thu Jan 21, 2016 2:18 pm

Any news about the "Switch" menu in Winbox?
Did not even appear in the latest 6.34rc version.

Moreover, there is no MASTER-PORT and BANDWIDTH (RX/TX) drop-down controls in "interfaces" settings (Winbox).

But changing master-port is still available in Webfig or terminal.

vstman · Sun Jan 24, 2016 5:30 am

My RB3011 is missing same stuff..............really Mikrotik? Can we down grade to 6.33.2, should we?

Zorro · Thu Jan 28, 2016 1:38 am

different consumers - different opinions.
you love external PSU's in you routers ? i HATE them?
same about monitors, notebooks and number of other relevant gear.
its simply not practical or safe even in SOHO environment. yes its bit "messier" and bulkier, less "sexy-looking", but its more Practical thing. and usually - cheaper and more reliable solution, btw.

tealc · Thu Jan 28, 2016 5:26 pm

@Zorro MikroTik gives a very usable alternative, POE in. I have to admit that I started to like thoose much more than either built-in or external PSU. Especially in rack applications. Anyone who teared down rack because of faulty PSU (in switch for example) exactly knows what I mean

Poslano sa mog Mi-4c koristeći Tapatalk

ronniee · Sat Jan 30, 2016 12:21 am

WHY WHY WHY???
No internal PSU???

It is a good hardware, but the external small power adapter, it's a shame.
All normal rack mount (ex. tplink, etc.) gigabit switch has internal PSU, and normal pc power cable.
Even this is a router and not a small switch.
I see on the right side of the 3011 case is a place for power plug, I hope the new production batch will have internal PSU.

Sat Jan 30, 2016 6:38 am

definitively

it never rains to everyone's taste

Sat Jan 30, 2016 6:39 am

external power supply are quickly field replaceable without opening the device

point for external psu

abis · Sat Jan 30, 2016 1:20 pm

Hello,

LCD and Switch menu missing... Anyone else have that problem?

Thank you!

p.s. oh, I just saw *) winbox - added LCD menu for RB3011; will be added Switch menu too?

Thank you MT for WinBox 3.1

dobrasekwifi · Sat Jan 30, 2016 7:26 pm

Just received two RB3011 and struggling to repartition them to have two partitions.

It accepts the commands either via terminal or winbox, reboots fine but after a reboot there is still only one partition.

Anyone else tried repartitioning?

Hello, I didn't be able to repartition my RB3011 with ROS 6.33.5, could you help me? Is this supported function for arm processor? Thank you.

mavink · Sun Jan 31, 2016 10:53 am

The new 6.35 release still hasn't addressed the lack of repartitioning functionality on the RB3011; switch menu is visible in Webfig but not in Winbox, and the master port field is still missing for Ethernet interfaces when using Winbox.

abis · Sun Jan 31, 2016 12:17 pm

The new 6.35 release still hasn't addressed the lack of repartitioning functionality on the RB3011; switch menu is visible in Webfig but not in Winbox, and the master port field is still missing for Ethernet interfaces when using Winbox.

Download WinBox 3.1

vitaly2016 · Mon Feb 01, 2016 8:47 am

1. Friday's release of ROS 6.34 did not solve issue with system time dramatic slow. The only workaround is to switch NTP client off/on periodically

2. My RB3011 reboots within 30 seconds after trying to shutdown it from Winbox. Anyone who has RB3011, please report do you have such issue or not.

kiler129 · Mon Feb 01, 2016 10:44 am

2. My RB3011 reboots within 30 seconds after trying to shutdown it from Winbox. Anyone who has RB3011, please report do you have such issue or not.

I bet it will require RouterBOOT update and I think it's not high-priority task since almost noone shutdowns routers

I'm truly interested in your use-case for that.

Mon Feb 01, 2016 4:28 pm

It was already officially stated that all routerboards are safe to be cut off from the power. Making shutdown leads routerboards to the state in which they cannot be switched on in other way than power recycling. Therefore shut down has sense only for pc or virtualized versions of ros.

Mon Feb 01, 2016 4:33 pm

My RB3011 reboots within 30 seconds after trying to shutdown it from Winbox

Yes, all RouterBOARDs will do this, it is not a bug per-se, it is more something like unsupported feature. Device needs to be disconnected from power to turn off completely. If you don't unplug it, it will start again. Shutdown command is not required, it is quite safe to just unplug it.

kiler129 · Mon Feb 01, 2016 7:30 pm

Shutdown command is not required, it is quite safe to just unplug it.

Isn't a shutdown command only useful while running with external storage for e.g. proxy? Cutting power may damage filesystem on it since it's r/w.

vitaly2016 · Wed Feb 03, 2016 9:25 am

2. My RB3011 reboots within 30 seconds after trying to shutdown it from Winbox. Anyone who has RB3011, please report do you have such issue or not.
I bet it will require RouterBOOT update and I think it's not high-priority task since almost noone shutdowns routers
I'm truly interested in your use-case for that.

Before today I always thought that I should and I must shutdown Mikrotik router before unplug power supply (PS).
Where can I read that unplugging power source is quite safe for Mikrotik if it does not write on external disk drive?

If it is safe why after such unplugging we have RED WARNINGS in log?

What happens with Mikrotik's internal store while unplugging PS in moment of writing log's entry?

kiler129 · Wed Feb 03, 2016 10:02 am

Filesystems designed for flash & routers are simple and resistant. If you cut the power in the middle of write you'll lose last write (that's how journaling filesystem works). Giving the fact that these filesystem are WAY simpler than e.g. ext4 you can safely unplug the power. Also applications are written in a way to deal with such situations.
I think the only exception is external harddrive - if you have some full fledged filesystem & running advanced web proxy you generally be better if you unmount filesystem or remount it r/o before unplugging.

I seen information about "cutting the cord" being safe for ROS somewhere in wiki. Also @normis, who works in MT, said that many times

Red warning in MT log serve different purpose. It may be misleading for beginners, but in fact you should know MT is generally professional network equipment. In home we often don't care if router rebooted in the middle of the night - in HA environments it's very important information (having router lose connection for few seconds is not an emergency, but sudden reboot may be sign for something bad).
So in summary these log entries are to inform about sudden reboots.

Btw. I think about auto boot after 30s after shutdown as a safety feature in fact. If you accidentally shutdown AP with battery backup on high mast you'll be thanking for it (and yes, I'm talking from my own experience

).

soyelpulpo · Wed Feb 03, 2016 5:10 pm

My RB3011 reboots within 30 seconds after trying to shutdown it from Winbox
Yes, all RouterBOARDs will do this, it is not a bug per-se, it is more something like unsupported feature. Device needs to be disconnected from power to turn off completely. If you don't unplug it, it will start again. Shutdown command is not required, it is quite safe to just unplug it.

Hi, if safe why the log complains about impropper shutdown? Maybe the message needs to be changed.

vitaly2016 · Thu Feb 04, 2016 5:38 pm

but sudden reboot may be sign for something bad).
So in summary these log entries are to inform about sudden reboots.

Thank you very much for extended explanations. Now I understand.

Steveocee · Thu Mar 03, 2016 10:11 pm

On paper sounds brilliant. Execution not so great though and MT support don't seem to be able to answer this;
http://forum.mikrotik.com/viewtopic.php ... ead#unread

mono7806 · Thu Apr 14, 2016 7:57 pm

Hi!

Sorry for my bad English.
Is this hardware is good and stable? The 2x1,4GHz ARM CPU sounds good but it is the first ARM based hardware router on the Mikrotik repertoire as I know.
Can somebody write his experience with this device?

Thanks!

kiler129 · Fri Apr 15, 2016 6:01 am

It has some problems with mysterious false-positive loop detection, but other than that it's good.

mono7806 · Sat Apr 16, 2016 7:38 pm

It has some problems with mysterious false-positive loop detection, but other than that it's good.

Thanks your answer!
What is the false-positive loop detection problem exactly? I never heard about this problem.

kiler129 · Sat Apr 16, 2016 8:13 pm

There's a separate topic about that issue: http://forum.mikrotik.com/viewtopic.php?t=104716

mono7806 · Sun Apr 17, 2016 4:07 pm

There's a separate topic about that issue: http://forum.mikrotik.com/viewtopic.php?t=104716

Thank you I read this topic. I think even I'm waiting a few months to purchase... This is a new architecture. The Mikrotik still have to work on it.

BennyT · Mon Apr 18, 2016 4:07 pm

I am interested in using the 3011 device. Would be interesting for me too when the bug is fixed. Thanks

maara · Fri May 27, 2016 7:14 pm

Hi,

Anyone tested OVPN throughput when using aes-256?

Thanks!

umatrix · Sun Jun 12, 2016 10:26 am

I've just got my RB3011, and it seems that USB port isn't working. Modem starts to blink, but no LTE interface appears. USB flash drives are not visible too. Is it a hardware problem? Should I replace the device?

umatrix · Mon Jun 13, 2016 11:50 am

With the latest software update 6.36rc28 my RB3011 doesn't see any usb devices. With current version it works fine.

grusu · Tue Jun 14, 2016 2:50 pm

With the latest software update 6.36rc28 my RB3011 doesn't see any usb devices. With current version it works fine.

I can confirm. I tried with several USB device and does not work on 6.36rc28. All works fine in 6.35.4

kristaps · Wed Jun 15, 2016 10:39 am

We replicated problem and we will fix this issue with RB3011 and usb.

conecting · Sat Nov 12, 2016 11:19 am

Hi,
have anybody tested RB3011UiAS-RM with shared drive connected on USB 3.0 port for SMB or Widows share performance ?
Which speed are you getting ?

cszolee79 · Tue Nov 22, 2016 4:10 pm

Hi,
have anybody tested RB3011UiAS-RM with shared drive connected on USB 3.0 port for SMB or Widows share performance ?
Which speed are you getting ?

I only had an USB2 HDD, got 30mb/s on SMB.

sbeauchamp · Mon Apr 10, 2017 8:59 pm

did the encryption hw acceleration ever get turned on for this model?

Tue Apr 11, 2017 12:30 am

did the encryption hw acceleration ever get turned on for this model?

No this requires a kernel newer than the 3.3 that RouterOS v6 uses.

Your best bet is to use a CCR1009, RB1100AHx4 or RB750Gr3

marcin21 · Tue Apr 11, 2017 6:46 pm

what about flapping 6-10 ports of 3011?

viewtopic.php?f=3&t=104899
viewtopic.php?f=3&t=119258

Is it gonna be fixed or is it gonna stay this way forever?

Aytishnikcom · Thu May 11, 2017 11:56 am

IPsec accelerator (HW acceleration) RB3011UiAS-RM ???
Когда, сколько ждать?
When, how long to wait?

IPsec accelerator support for RB3011 is still being worked on, the HW acceleration is not yet supported for this model. The CPU is much faster than RB2011 even without HW accelerator.
But HW acceleration will be supported in the near future?
We are working on it, yes.

isbiyanto · Thu Sep 21, 2017 1:56 pm

how many nand have your rb3011??
RB3011RESOURCES.jpg

I have RB3011UiAS-RM with CPU Frequency is empty. It's bug or something wrong with my RB?

Thanks.

himvas · Wed May 16, 2018 1:09 pm

IPsec accelerator (HW acceleration) RB3011UiAS-RM ???
Когда, сколько ждать?
When, how long to wait?

IPsec accelerator support for RB3011 is still being worked on, the HW acceleration is not yet supported for this model. The CPU is much faster than RB2011 even without HW accelerator.
But HW acceleration will be supported in the near future?
We are working on it, yes.

After one year what about HW encryption acceleration?

stormeporm · Tue Apr 16, 2019 12:20 pm

The hardware acceleration for ipsec is here
https://download2.mikrotik.com/news/news_88.pdf

Who is online