Hello,

I have 4 smaller sites, which have some local systems that need layer 2 connectivity to a main site. Therefore I need routerboards which can handle 1 Gbit/s of EoIP traffic (without any IPSec). Which hardware do you recommend for
- the 4 smaller sites?
- the 1 main site?

What about
- 5 pieces of ?RB3011UiAS-RM?
- 5 pieces of RB750Gr3?
- 5 pieces of RB850Gx2?
- 5 pieces of CCR1009-8G?

Regards
Michael

Hello,

I have 4 smaller sites, which have some local systems that need layer 2 connectivity to a main site. Therefore I need routerboards which can handle 1 Gbit/s of EoIP traffic (without any IPSec). Which hardware do you recommend for
- the 4 smaller sites?
- the 1 main site?

What about
- 5 pieces of ?RB3011UiAS-RM?
- 5 pieces of RB750Gr3?
- 5 pieces of RB850Gx2?
- 5 pieces of CCR1009-8G?

Regards
Michael

Re: 1 Gbit/s of EoIP
I don't think you are going to find any Mikrotik hardware/motherboard that can handle that kind of a CPU load.
I can't even get 300 meg EoIP on any Mikrotik products and I have tried many times.
I would guess/try an Intel 3 GHz or faster Xeon based motherboard with lots of CPU cache running ROS x86. You will need one on both sides of the EoIP tunnel.

North Idaho Tom Jones

CCR1009 do it. I did the test in my MUM presentation Paris France 2016.

We have CCR1009 and CCR1036 doing 1gbit EoIP throughput.

We have CCR1009 and CCR1036 doing 1gbit EoIP throughput.

How many layer 3 hops does your EoIP traffic traverse through ?
What do you get on a UDP btest through your EoIP tunnel ?