Community discussions

MikroTik App
 
helmyaja
just joined
Topic Author
Posts: 1
Joined: Tue Apr 22, 2008 5:50 am

Reset RB-411 OS Level 4

Tue May 06, 2008 6:55 am

can anybody help me??i can't use reset button on rb-411... :cry: :cry:
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Reset RB-411 OS Level 4

Tue May 06, 2008 9:15 am

the reset button is for backup loader (something like a BIOS). if you need to reload the OS config, you have to use the jumper hole.
resethole.jpg
You do not have the required permissions to view the files attached to this post.
 
User avatar
LZiX
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Wed Aug 13, 2008 8:33 pm
Location: Kazakhstan

Re: Reset RB-411 OS Level 4

Mon Jun 29, 2009 8:56 am

How time need use this contacts ? I press before poweron and unpress after loading but board not reset.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Reset RB-411 OS Level 4

Mon Jun 29, 2009 9:10 am

you need to hold until hear beep, or software starts. if not reset, you might be doing something incorrectly. make sure you are using a metal object
 
User avatar
LZiX
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Wed Aug 13, 2008 8:33 pm
Location: Kazakhstan

Re: Reset RB-411 OS Level 4

Mon Jun 29, 2009 10:11 am

Thank you, I try again and reset unit done.
 
saeedagha
just joined
Posts: 4
Joined: Wed Dec 08, 2010 12:58 pm

Re: Reset RB-411 OS Level 4

Fri Dec 10, 2010 10:03 am

I have tried this many times, but it doesn't work! what the problem is? should it be connected to network or not? what about connecting and disconnecting the power during the reset process?
 
saeedagha
just joined
Posts: 4
Joined: Wed Dec 08, 2010 12:58 pm

Re: Reset RB-411 OS Level 4

Fri Dec 10, 2010 10:11 am

Does it reset the IP address too? because I can't access to my Routerboard neither via winbox nor the telnet. what should I do?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Reset RB-411 OS Level 4

Fri Dec 10, 2010 10:13 am

Does it reset the IP address too? because I can't access to my Routerboard neither via winbox nor the telnet. what should I do?
use the Winbox loader to connect with MAC address, see this page:
http://wiki.mikrotik.com/wiki/Manual:First_time_startup
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Reset RB-411 OS Level 4

Fri Dec 10, 2010 11:12 am

Does it reset the IP address too? because I can't access to my Routerboard neither via winbox nor the telnet. what should I do?
without any parameters /system reset-configuration will save current config in backup file, remove everything, and if present, set up defaults (can be changed using netinstall whilst reinstalling RouterOS)

So, if router does not have that default - it is completely blank and only possible way to connect to router is: mac access using winbox, mac-telnet
 
riaanp
just joined
Posts: 2
Joined: Mon Dec 07, 2015 3:53 pm

Re: Reset RB-411 OS Level 4

Mon Dec 07, 2015 3:59 pm

Hi there,

I'm stuggling with the same problem. I cannot reset an RB411AH.
I am using a metal screwdriver
It does touch both contacts

I have tried several things in the bridging of the 2 connections:
1) Power on, bridged, until the 1st beep
2) Power on, bridged, until the 2nd double beep
3) Power on, bridged, half way between the 2 sets of beeps
4) Power on, bridged, for a minute

System does not reset.

Please assist
 
hnoor0077
just joined
Posts: 1
Joined: Sat Apr 30, 2016 1:27 pm

Re: Reset RB-411 OS Level 4

Sat Apr 30, 2016 1:44 pm

I have tried this many times, but it doesn't work! what the problem is?????

Who is online

Users browsing this forum: ToTheCLI and 23 guests