Community discussions

MikroTik App
 
techsimp
newbie
Topic Author
Posts: 37
Joined: Sat May 24, 2008 11:04 pm

Need a IPSEC termination solution

Tue Dec 23, 2008 5:49 am

Does anyone have a solution to terminate dozens of IPSEC tunnels into a RB433ah? I have seen VPN accelerator mini-pci cards but I did not see them on the supported hardware/driver list. I'd like to extend IPSEC tunnels to each of my customers so as not to have to use wireless security. Ideally I'd like to use the routerboards, but if needed I could go another route. I just want to keep it under $400. Thanks,
Justin
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: Need a IPSEC termination solution

Tue Dec 23, 2008 2:33 pm

Hardware accelerators are not supported by RouterBOARDs. It depends how many dozens do you want to terminate and how much traffic you want to send through.
 
techsimp
newbie
Topic Author
Posts: 37
Joined: Sat May 24, 2008 11:04 pm

Re: Need a IPSEC termination solution

Wed Dec 24, 2008 3:12 pm

I'm looking at about 30 IPSEC tunnels for about 3Mbps total user throughput. Any suggestions?
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: Need a IPSEC termination solution

Tue Dec 30, 2008 3:16 pm

3Mbps or 3+30=90Mbps of IPSec traffic.
There should not be any problems for 3Mbps, however not for 90Mbps of the IPSec traffic.
 
miahac
Long time Member
Long time Member
Posts: 516
Joined: Wed Dec 14, 2005 5:04 pm
Location: Wichita, KS

Re: Need a IPSEC termination solution

Sat Jan 17, 2009 6:27 pm

please post network diagram with total bandwith on each link.
 
tolstii
Trainer
Trainer
Posts: 33
Joined: Mon Jun 11, 2007 10:16 am
Location: Russia
Contact:

Re: Need a IPSEC termination solution

Mon Feb 09, 2009 10:55 pm

IPSec.
Tunnel/ AH+3DES

400 series RX- 6Mbps / TX-1,8Mbps
400AH(600Mhz) RX- 11Mbps / TX-3,8Mbps
400AH(680Mhz) RX- 12Mbps / TX-4Mbps
400AH(800Mhz) RX- 13Mbps / TX-4,8Mbps
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Need a IPSEC termination solution

Tue Feb 10, 2009 2:22 pm

ipsec des3 RB1000 500MBit 8) for more information look at newsletter #15
 
astib
just joined
Posts: 8
Joined: Sun Feb 15, 2009 8:16 pm
Location: Czech Republic

Re: Need a IPSEC termination solution

Mon Feb 16, 2009 1:41 pm

Hi all, I am here completely new, so sorry if I ask question answered already somewhere else.
What I am looking for is IPsec encryption performance guide, something similar to routing/conntrack one which can be found on routerboard web-site.

I suppose that it is not available; can you please share your knowledge about Ipsec performance on most common platforms?
Many thanks,

Astib

Who is online

Users browsing this forum: Google [Bot], RogerWilco and 37 guests