NetInstall 3.20
ROS 3.20-mipsbe
Serial cable is plugged in, no issues accessing the system.
NAND is Formatted
Netinstall sees the RB450
Code: Select all
Welcome to MikroTik Router Software remote installation
Press Ctrl-Alt-Delete to abort
mac-address: 00:0C:42:2E:FD:04
mac-address: 00:0C:42:2E:FD:05
mac-address: 00:0C:42:2E:FD:06
mac-address: 00:0C:42:2E:FD:07
mac-address: 00:0C:42:2E:FD:08
software-id: BGQK-LTT key:
/5XKDevtGg0deKglcMWPqdOBsCx4pCKS1aUMyFwO0OZDNT91FbtzsgSPkIPsNcv2sOKvbVKCYsRx+csQ
32P3cB==
Waiting for installation server...
Clicking the Install button it flashes "installing" very quickly and then goes back to "Ready".
I've used NetInstall many times before but this is the first time I have had this issue.
Tried with 3 RB450s, all are doing the same thing. Is the latest NetInstall broken?
Also, is it still possible to reload RouterOS via serial? If not, perhaps that should be put back in for failsafe reasons.