I've added ether4 to a LAN bridge with DHCP server running on it. But I didn't managed to obtain IP address on notebook connected directly to ether4. Did I missed something ?
Code: Select all
[admin@home] /interface bridge> print detail
Flags: X - disabled, R - running
1 R name="br60" mtu=1500 l2mtu=1520 arp=enabled mac-address=00:0C:42:56:26:62 protocol-mode=rstp priority=0x8000
auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m
[admin@home] /interface bridge> port print detail
Flags: X - disabled, I - inactive, D - dynamic
1 interface=vlan60 bridge=br60 priority=0x80 path-cost=10 edge=auto point-to-point=auto external-fdb=auto horizon=none
2 I interface=ether4 bridge=br60 priority=0x80 path-cost=10 edge=auto point-to-point=auto external-fdb=auto horizon=none