Community discussions

MikroTik App
 
User avatar
promind
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Thu Feb 23, 2006 11:26 am
Location: Rousse, Bulgaria
Contact:

RouterBoard 1000 linux support patch?

Sat Jan 09, 2010 2:04 pm

I saw on internet patch for RB600 series routerboard but it's for the MPC83xx cpu.
I believe RB1000 is MPC8547(e500c) CPU...is there any official or unofficial kernel patch for that sort of routerboards?
thanks
Last edited by promind on Tue Jan 12, 2010 11:12 am, edited 1 time in total.
 
User avatar
DannyZ
Member Candidate
Member Candidate
Posts: 230
Joined: Mon Sep 07, 2009 2:21 pm
Location: Latvia

Re: Boot from CF setting from winbox?

Sat Jan 09, 2010 6:29 pm

U wanna run ROS with's installed ROS? Maybe im wrong (then point my mistake)
/system routerboard settings>edit>boot-device and change boot device
 
User avatar
promind
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Thu Feb 23, 2006 11:26 am
Location: Rousse, Bulgaria
Contact:

Re: Boot from CF setting from winbox?

Mon Jan 11, 2010 9:54 am

Unfortunately there is no such option...nevermind I've made myself serial cable and it's ok...but it would be nice if MikroTik guys add cf boot option within RouterOS :)
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Boot from CF setting from winbox?

Mon Jan 11, 2010 10:44 am

To change the option back, you will need a serial cable anyway :)
 
User avatar
promind
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Thu Feb 23, 2006 11:26 am
Location: Rousse, Bulgaria
Contact:

Re: Boot from CF setting from winbox?

Mon Jan 11, 2010 12:56 pm

Yes I know that...I already have serial cable but I cannot boot the linux ...which interface is the CF slot? sda/sdb or sdc?
It reaches "Loading kernel" and my serial connection stops there...
I'm using RB1000 I think rb1000 and rb600 should use same kernel, right?
 
User avatar
promind
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Thu Feb 23, 2006 11:26 am
Location: Rousse, Bulgaria
Contact:

Re: Boot from CF setting from winbox?

Mon Jan 11, 2010 7:48 pm

Here is a screenshot...
It reaches here and nothing happens and just stays there forever...
On rb600 it worx fine.
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 33 guests