Community discussions

MikroTik App
 
meno
Member Candidate
Member Candidate
Topic Author
Posts: 233
Joined: Sat Jul 19, 2008 4:45 am

RB433 nand flashed but ether1 doesnt work

Mon Mar 22, 2010 9:34 pm

hi guys, Ive some problem with a RB433, the ether1 is broken doesnt work at all, but also it flashed the nand, can you say me another way to use ether2 for netinstall ?

thanks
 
aaa
Member
Member
Posts: 458
Joined: Mon Apr 11, 2005 11:54 am
Location: Latvia, Baltezers

Re: RB433 nand flashed but ether1 doesnt work

Mon Mar 22, 2010 9:46 pm

It's not possible. Fix ether1 and then reinstall RouterOS.
 
meno
Member Candidate
Member Candidate
Topic Author
Posts: 233
Joined: Sat Jul 19, 2008 4:45 am

Re: RB433 nand flashed but ether1 doesnt work

Tue Mar 23, 2010 2:14 am

the problem is the switch chip I can´t get it... any other method like xmodem or netinstall via ether2 ?
 
meno
Member Candidate
Member Candidate
Topic Author
Posts: 233
Joined: Sat Jul 19, 2008 4:45 am

Re: RB433 nand flashed but ether1 doesnt work

Tue Mar 23, 2010 3:57 am

I got a IP175D and changed it but doesnt work.. when the bootloader start and do POST just orange led turned on, on ether1, but in ether2 the both led works. just when u plugg onthe power
 
aaa
Member
Member
Posts: 458
Joined: Mon Apr 11, 2005 11:54 am
Location: Latvia, Baltezers

Re: RB433 nand flashed but ether1 doesnt work

Tue Mar 23, 2010 11:07 am

IP175C and IP175D it's not replacement from software viewpoint.
 
meno
Member Candidate
Member Candidate
Topic Author
Posts: 233
Joined: Sat Jul 19, 2008 4:45 am

Re: RB433 nand flashed but ether1 doesnt work

Tue Mar 23, 2010 1:12 pm

IP175C and IP175D it's not replacement from software viewpoint.
im trying to fix the ether1 (PORT1) for later fix it the OS with netinstall. remember ive ether1 damaged
 
meno
Member Candidate
Member Candidate
Topic Author
Posts: 233
Joined: Sat Jul 19, 2008 4:45 am

Re: RB433 nand flashed but ether1 doesnt work

Wed Mar 24, 2010 2:31 am

my ether2 and ether3 works but I cant install routerOS with netinstall any method to use ether2?

another thing I want to know if ether1 is connected directly to the AR71XX ? and other 2 ports through the switch chip
 
Ozelo
Member
Member
Posts: 338
Joined: Fri Jun 02, 2006 3:56 am

Re: RB433 nand flashed but ether1 doesnt work

Thu Apr 08, 2010 10:47 pm

We found that IP175D is NOT working as expected, even on ROS 4.6... Can't ping with large packets i.e. 65535 packet size, but you can ping with packet size less than 44000 bytes.

Who is online

Users browsing this forum: No registered users and 23 guests