Community discussions

MikroTik App
 
hitech
just joined
Topic Author
Posts: 2
Joined: Tue May 11, 2010 11:17 pm

help rb 433 please

Tue May 11, 2010 11:23 pm

hello friends, recently bought three cards and a rb433 R52-350, but the rb does not recognize the cards, the Mac does not recognize the cards too.
it hangs on startup now with 4 LEDs lit now with only one LED, and when I assign an ip board she communicates not only appearing mac network card in which rb is linked.
I wonder if some procedure to rewrite the firmware rb or even with this defect
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: help rb 433 please

Wed May 12, 2010 2:57 pm

You can rewrite MikroTik RouterOS version on RouterBOARD 433,
http://wiki.mikrotik.com/wiki/Netinstall

It is not possible to rewrite anything on the wireless card RouterBOARD52H.


Make sure you have wireless package installed on RouterBOARD 433, then try to test wireless card one by ones.
Do you have any other RouterBOARD, where wireless cards could be tested?
 
hitech
just joined
Topic Author
Posts: 2
Joined: Tue May 11, 2010 11:17 pm

Re: help rb 433 please

Thu May 13, 2010 6:35 pm

unfortunately without success, because when I select the boot from lan, the rb lock again with 4 LEDs lit, no card inserted R52, several attempts to boot through lan and db9 but without success, maybe a video tutorial could all rest ajudar.o been tried without success ..
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: help rb 433 please

Fri May 14, 2010 3:32 pm

Connect RouterBOARD directly to your computer (to exclude any network device, which may stand in the middle), disable firewall on Windows computer.
Download the latest Netinstall from MikroTik.com, make sure you have specified correct address for Netinstall program, which should be from the same subnet as on laptop.
Post your screenshot from Terminal, if procedure will be unsuccessful.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: help rb 433 please

Fri May 14, 2010 3:32 pm

Connect RouterBOARD directly to your computer (to exclude any network device, which may stand in the middle), disable firewall on Windows computer.
Download the latest Netinstall from MikroTik.com, make sure you have specified correct address for Netinstall program, which should be from the same subnet as on laptop.
Post your screenshot from Terminal, if procedure will be unsuccessful.

Who is online

Users browsing this forum: No registered users and 21 guests