Hi,
Has anyone tried to change the memory frequency on the RB800 to 533Mhz? "/system routerboard settings set memory-frequency=533Mhz"
And to Mikrotik is this supported? I have heard that if the function is available it is also OK from Mikrotik?
I have a RB800 with R52H and R52n @home running ROS v5beta3
[***admin@hades.*****.org] /system routerboard settings> print
baud-rate: 115200
boot-delay: 2s
boot-device: nand-if-fail-then-ethernet
enter-setup-on: any-key
cpu-frequency: 800MHz
memory-frequency: 400MHz
boot-protocol: bootp
enable-jumper-reset: yes
I read in this thread that it works on the RB1100.
http://forum.mikrotik.com/viewtopic.php ... &start=150
If this works with the RB800 it would be the same as the RB1100 in the above thread. And more interesting it would be the same as the RB1000 speed.
Thanks in advance!