Community discussions

MikroTik App
 
rgbiernat
just joined
Topic Author
Posts: 3
Joined: Mon Jan 10, 2011 6:54 pm

RB 750G POWER LED died?

Wed Jan 12, 2011 1:59 pm

Hi there,

I recently bought three 750G. I recently realized that the POWER LED (NOT the ACT LED) of one of those devices died. It does not light up when I connect power. I switched power supply with the other router but same problem (Using the standard power supply). However the Router works as nothing has happened.

Am I overlooking something here? As far as I have learned the RouterBoard commandline syntax there is only this command:

Blink x

for the ACT LED. But is there also a command for the POWER LED? I strongly doubt that. Please correct me if I am wrong.

So - is it time for RMA or getting it replaced by my local vendor? I will soon deploy it in a dark rack where I need this light.

Rüdiger
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB 750G POWER LED died?

Wed Jan 12, 2011 2:04 pm

no, you can't manually trigger the power LED.

if you really need the light, you can ask the vendor to repair or replace it, but be careful, depending on the seller, this could take a while.
 
rgbiernat
just joined
Topic Author
Posts: 3
Joined: Mon Jan 10, 2011 6:54 pm

Re: RB 750G POWER LED died?

Thu Jan 13, 2011 12:18 pm

Ok, thanks, I will ask for a replacement.

Rüdiger
 
someuser
Member Candidate
Member Candidate
Posts: 102
Joined: Tue Apr 13, 2010 7:05 am

Re: RB 750G POWER LED died?

Mon Jan 17, 2011 7:22 am

Interesting, I have exact same problem. Which vendor did you purchase from?
Streakwave by chance?
 
sobrado
newbie
Posts: 25
Joined: Sun Dec 26, 2010 3:56 pm

Re: RB 750G POWER LED died?

Sun Jan 30, 2011 1:07 am

I have the same problem on one of the three RB750G I bought a few weeks ago. Power LED is dead.

The seller will not replace this unit, it is a shame.

Who is online

Users browsing this forum: RogerWilco and 27 guests