Page 1 of 1

How to reset RB450G?

Posted: Wed Mar 16, 2011 11:52 pm
by samuelongui
I have try this:

unplug DC adapter.
press reset.
connect DC adapter wihout stop pressing reset

it works on RB750G, but not on RB450G. which is the correct sequence? Without Winbox of course.

Thanks

Re: How to reset RB450G?

Posted: Wed Mar 16, 2011 11:56 pm
by fewi
http://routerboard.com/pricelist/downlo ... ile_id=143
Software Reset
It is possible to reset all software configuration by short-circuiting the reset-hole during the power-up (see
ROS reset in layout diagram). No confirmation or passwords will be asked, so use with caution. This feature
can be disabled in the “system routerboard settings” menu by switching the “enable-jumper-reset”
parameter to “no”.

Re: How to reset RB450G?

Posted: Thu Mar 17, 2011 12:02 am
by samuelongui
Too difficult, I don't understand anything :?

Re: How to reset RB450G?

Posted: Thu Mar 17, 2011 12:05 am
by InoX

Re: How to reset RB450G?

Posted: Thu Mar 17, 2011 12:09 am
by samuelongui
so, I have to close the hole, plug the jack DC and it will reset, correct?

Re: How to reset RB450G?

Posted: Thu Mar 17, 2011 5:24 am
by robby

Re: How to reset RB450G?

Posted: Thu Mar 17, 2011 10:29 am
by normis
so, I have to close the hole, plug the jack DC and it will reset, correct?
yes, correct. put some screwdriver (or anything metal) into the hole, apply power and wait until it boots.


it's much easier than netinstall, by the way

Re: How to reset RB450G?

Posted: Thu Mar 17, 2011 10:40 am
by robby
it's much easier than netinstall, by the way
Ha ha ha.. true Normis, for most people, but for me, it's easier using netinstall, maybe because I am quite used to it.

Re: How to reset RB450G?

Posted: Tue Feb 12, 2013 11:07 am
by heviejob
How do I get a RB450g into netinstall mode if I don't have a serial
console cable?

Re: How to reset RB450G?

Posted: Wed Mar 23, 2016 6:25 am
by Cydon
does it has a button that need to be pressed ? the reset jumper hole
or just simply put a metal thing in that hole ?
i've been asked to reset RB450, but when i open the case and put a needle in the reset hole, there's nothing, i thought there would be a button or something

Posted: Wed Mar 23, 2016 8:06 am
by sash7
https://youtu.be/G-iIxxXcYq0

Sent from my LG-H502 using Tapatalk

Re:

Posted: Wed Mar 23, 2016 10:00 am
by Cydon
https://youtu.be/G-iIxxXcYq0

Sent from my LG-H502 using Tapatalk
too bad the office where i currently interning doesn't give an access to youtube for bandwidth reason :s
thanks for replying tho