Community discussions

MikroTik App
 
chalan
newbie
Topic Author
Posts: 27
Joined: Wed Sep 14, 2005 1:29 pm

rb1100 problems r5.25 fw 3.07

Fri Aug 16, 2013 9:51 am

hi, my rb1100 first suddenly reboots, after reboot there was ip unassociated with interfaces (192.168.216.1/24 on unknown etc). i reconfigure it back, after two weeks suddenly 100% CPU load, see belov, reboot did not fix it. Router dont do anything, its was just ready for real traffic, but im in doubt now. How to resolve it? r5.25 fw 3.07 Please help, thank you

NAME CPU USAGE
ethernet all 0.5%
console all 0.5%
flash all 0%
firewall all 0%
winbox all 0%
management all 0%
telnet all 0.5%
profiling all 5%
unclassified all 93.5%

[admin@gw-vajnorska43] > system resource print
uptime: 14h11m22s
version: 5.25
free-memory: 481808KiB
total-memory: 516216KiB
cpu: e500v2
cpu-count: 1
cpu-frequency: 799MHz
cpu-load: 100%
free-hdd-space: 444960KiB
total-hdd-space: 520192KiB
write-sect-since-reboot: 78692
write-sect-total: 34416262
bad-blocks: 0%
architecture-name: powerpc
board-name: RB1100
platform: MikroTik

Image
 
chalan
newbie
Topic Author
Posts: 27
Joined: Wed Sep 14, 2005 1:29 pm

Re: rb1100 problems r5.25 fw 3.07

Fri Aug 16, 2013 5:36 pm

i created supout.rif file, where to send?
 
Neilson
Member Candidate
Member Candidate
Posts: 174
Joined: Tue Nov 06, 2012 10:42 pm
Location: Auckland, New Zealand

Re: rb1100 problems r5.25 fw 3.07

Sun Aug 18, 2013 7:20 am

send it to support[at]mikrotik[dot]com

include the supout.rif and details of the problems and things you have tried.

Mikrotik support will also ask / suggest you try it with the latest public release (6.2) so I would advise trying it with that version to check the problem still occurs.

Regards
Alexander
 
chalan
newbie
Topic Author
Posts: 27
Joined: Wed Sep 14, 2005 1:29 pm

Re: rb1100 problems r5.25 fw 3.07

Mon Aug 19, 2013 9:20 am

pull out the power didnt help. upgrade to ros 6.2 helped, but is ros6.2 stable?

i notice a problem with the beeper after upgrade. RB1100 beeps once after power on, than after boot when is ready should beep twice, but no twice beep at all. With ros 5.25 beeps work ok. Tested with 3x RB1100.

Who is online

Users browsing this forum: AndHe and 39 guests