Community discussions

MikroTik App
 
sajid077
just joined
Topic Author
Posts: 19
Joined: Tue Sep 20, 2011 5:06 pm

Omnitik problem

Thu Sep 22, 2011 9:50 am

i m sajid


i m using Omnitik but it is not working in 360 degree when i was connect 3rd from other (All radio r other different location in 1.5 km round area) loacation ,it is opp. Omnitik that time it 's connectivity is very bad,
omnitik radio need require elighment??(i think no require)???

is it saport 5.8Ghz??/ plz give solution.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: Omnitik problem

Thu Sep 22, 2011 11:53 am

What kind of antenna do you use on the second end (1.5km from MikroTik)?
And what do you call by "bad signal"?
 
sajid077
just joined
Topic Author
Posts: 19
Joined: Tue Sep 20, 2011 5:06 pm

Re: Omnitik problem

Thu Sep 22, 2011 5:33 pm

there is installed 24dbi grid antenna and mikrotik groove...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Omnitik problem

Fri Sep 23, 2011 8:58 am

you will have the best signal if you point directly at the front of the omnitik unit (because of the antenna pattern), and also the best gain of the omnitik antenna is in 5.4GHz. try to rotate the omnitik unit, so that it's directly facing the client device, and your signal will be better. also try to change from 5.8 to 5.4GHz
 
sajid077
just joined
Topic Author
Posts: 19
Joined: Tue Sep 20, 2011 5:06 pm

Re: Omnitik problem

Fri Sep 23, 2011 2:20 pm

you will have the best signal if you point directly at the front of the omnitik unit (because of the antenna pattern), and also the best gain of the omnitik antenna is in 5.4GHz. try to rotate the omnitik unit, so that it's directly facing the client device, and your signal will be better. also try to change from 5.8 to 5.4GHz

antenna point direction is front of OmniTik unit currantly ........and i m using 5.4Ghz
 
sajid077
just joined
Topic Author
Posts: 19
Joined: Tue Sep 20, 2011 5:06 pm

Re: Omnitik problem

Mon Sep 26, 2011 1:47 pm

you will have the best signal if you point directly at the front of the omnitik unit (because of the antenna pattern), and also the best gain of the omnitik antenna is in 5.4GHz. try to rotate the omnitik unit, so that it's directly facing the client device, and your signal will be better. also try to change from 5.8 to 5.4GHz

antenna point direction is front of OmniTik unit currantly ........and i m using 5.4Ghz

antenna point direction is front of OmniTik unit currantly ........and i m using 5.4Ghz............. :(
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Omnitik problem

Mon Sep 26, 2011 1:54 pm

how is your groove antenna polarized, try to rotate it to horizontal polarization if you are on vertical

Who is online

Users browsing this forum: patrikg and 28 guests