I try to install ROS with Netinstall.
My first RB112 upgraded OK, but when I try with the second RB112, I get the following errormessage:
I've tried to format nand... anything else I should do?

Bricked?



RouterBOOT booter 2.6

RouterBoard 112

CPU frequency: 175 MHz
Memory size: 16 MB

Press any key within 2 seconds to enter setup..
kernel not found
trying bootp protocol....................................... OK
Got IP address: 192.168.100.98
resolved mac address 00:21:70:DC:46:0D
transfer started .......................... transfer ok, time=3.77s
setting up elf image... OK
jumping to kernel code
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Okei, after some searching, i found out that i need the RB112 or RB500 firmware, that is supposed to be located at routerboard.com, but i cant find it.

Anyone?

http://download.mikrotik.com/routeros-mipsle-5.7.npk ?

You can almost every version at http://download.mikrotik.com/routeros-$ ... ERSION.npk. Links also available from http://www.mikrotik.com/download.html .

Yeah, I know that, but I dont think id make my self clear on this one.

I need the firmware, the .fwf file for RouterBOOT, for RB112...

Edit: I've found it at http://www.routerboard.sk/#rb111_112, hope that works...

In Console, I used "upgrade firmware over serial port", and in hypertrm i used transfer and protocol Xmodem. Firmware update was 32kb, and went fine, rebooted and the upgraded to ROS 5.2 via ethernet and Netinstall.

Problem solved