Community discussions

MikroTik App
 
aladar
just joined
Topic Author
Posts: 2
Joined: Wed Feb 01, 2012 11:44 pm

RX 0Mbit

Wed Feb 01, 2012 11:50 pm

rb 411 AR at the interfaces with the command shows the torch tx 7Mbit/rx 0Mbit, the MT when pumping more than 6 Mbps pings 300-400. What could it be? wifi (built-in card) and lan bridge. If you change the firmware with the same result.
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RX 0Mbit

Thu Feb 02, 2012 12:28 pm

I don't understand the problem. You are asking where this traffic comes from?
[admin@MikroTik] > tool torch ether1 src-address=0.0.0.0/0
this will show you specifically which IP the traffic comes from

or better yet, use Torch in winbox, it's easier to use.
 
aladar
just joined
Topic Author
Posts: 2
Joined: Wed Feb 01, 2012 11:44 pm

Re: RX 0Mbit

Sun Feb 05, 2012 11:55 pm

Do I so understand that torch must show an outgoing traffic on interface how and entering? He why that stands on 0

Who is online

Users browsing this forum: Kipk and 30 guests